{"product_id":"bestech-dactyl-bt2608a","title":"Bestech Dactyl BT2608A Magnacut Blade Titanium with Micarta Handle Bolster Frame Lock Folding Knife","description":"\u003cp\u003eThe Bestech Dactyl BT2608A features a revolutionary CPM-MagnaCut blade, engineered to eliminate traditional steel trade-offs. This powder-metallurgy steel delivers exceptional toughness, outstanding wear resistance, and superior corrosion protection while maintaining remarkable edge stability. The 2.98\" blade is precision heat-treated to 62-63 HRC for optimal performance. Built with a titanium bolster and black canvas micarta handle, this 3.76 oz folding knife employs a bolster frame lock and ceramic ball bearings for smooth deployment. The front flipper design ensures rapid blade access. Designed by Caveman EDC, the Dactyl combines premium materials with innovative engineering for discerning knife enthusiasts.\u003c\/p\u003e\n\u003ch2 class=\"product-title\"\u003e\u003cstrong\u003eMagnaCut Blade Introduction\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"markdown markdown-main-panel stronger enable-updated-hr-color\" id=\"model-response-message-contentr_c212bf88af914365\" dir=\"ltr\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/edcmall.cn\/collections\/magnacut\"\u003eCPM-MagnaCut\u003c\/a\u003e is a revolutionary powder-metallurgy steel specifically engineered to break the traditional trade-offs in cutlery metallurgy, offering an extraordinary combination of high toughness, superb wear resistance, and near-saltwater-grade corrosion resistance. By eliminating chromium carbides from its microstructure, it achieves exceptional edge stability and resistance to chipping under heavy use. Its primary drawback is a minor compromise in absolute wear resistance compared to extreme, high-vanadium alloys like CPM-S90V, alongside a higher premium cost and a requirement for precise heat treatment to unlock its full potential.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eBlade Material: MC\u003cbr\u003eBlade Finish: Machine Satin + Flat Satin\u003cbr\u003eHandle Material: Titanium bolster +  Black Canvas Micarta Inlays\u003c\/p\u003e\n\u003cp\u003eHandle Finish: Stonewash\u003cbr\u003eOverall Length: 7.26\" \/ 184.3 mm\u003cbr\u003eClosed Length: 4.28\" \/ 108.6 mm\u003c\/p\u003e\n\u003cp\u003eBlade Length: 2.98\" \/ 75.7 mm\u003cbr\u003eBlade Thickness: 0.15\" \/ 3.8 mm\u003cbr\u003eBlade Hardness: 62 - 63 HRC\u003c\/p\u003e\n\u003cp\u003eLocking Mechanism: Bolster Frame Lock\u003cbr\u003eDeployment: Front Flipper, Fuller\u003cbr\u003eClip: Titanium, Black PVD\u003c\/p\u003e\n\u003cp\u003eBackspacer: Titanium, Black PVD\u003cbr\u003ePivot Collar: Titanium, Black PVD\u003cbr\u003ePivot: Stainless Steel, Black PVD\u003c\/p\u003e\n\u003cp\u003eHandle Screw: Stainless Steel, Black PVD\u003cbr\u003eBall Bearing: Ceramic\u003cbr\u003eKnife Weight: 106.5 g \/ 3.76 oz\u003cbr\u003eDesigner: Caveman EDC\u003c\/p\u003e\n\u003ch2\u003eBestech Dactyl BT2608A - CPM-MagnaCut Drop Point Front Flipper with a Black Canvas Micarta Inlay Frame\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/es\/collections\/bestech-knives\"\u003eBestech\u003c\/a\u003e \u003ca href=\"\/es\/collections\/bestech-dactyl\"\u003eDactyl\u003c\/a\u003e BT2608A is a Caveman EDC front flipper built on a titanium frame with black canvas micarta inlay: a 2.98 inch MagnaCut drop point at 62-63 HRC, a \u003ca href=\"\/es\/collections\/bolster-lock-knives\"\u003ebolster frame lock\u003c\/a\u003e and ceramic bearings. Weighing 106.5 g (3.76 oz) on a 7.26 inch frame, with a machine satin + flat satin blade and a tip-up titanium clip. Narrow, deep in the pocket and closer to a custom than the price suggests. More \u003ca href=\"\/es\/collections\/folding-knives\"\u003efolding knives\u003c\/a\u003e and \u003ca href=\"\/es\/collections\/magnacut\"\u003eMagnaCut folders\u003c\/a\u003e at EDCMALL.\u003c\/p\u003e\n\u003ch2\u003eCPM-MagnaCut at 62-63 HRC: No Trade-Offs Left to Make\u003c\/h2\u003e\n\u003cp\u003eCPM-MagnaCut exists because cutlery steel used to force a choice: hold an edge or resist rust. Crucible's powder-metallurgy recipe removes most of the chromium carbides that made that choice necessary, so at 62-63 HRC the Dactyl BT2608A keeps high wear resistance, real toughness and near-saltwater corrosion resistance at the same time. The 2.98 inch blade is short enough to stay stiff under load, which is exactly where a hard, fine-grained steel pays off. Compare it with \u003ca href=\"\/es\/collections\/magnacut-steel-folding-knives\"\u003eother MagnaCut folders\u003c\/a\u003e, \u003ca href=\"\/es\/collections\/frame-lock-knives\"\u003eframe lock knives\u003c\/a\u003e and older super steels like \u003ca href=\"\/es\/collections\/cpm-s35vn\"\u003eCPM-S35VN\u003c\/a\u003e in the table below.\u003c\/p\u003e\n\u003ch2\u003eWhy the Bestech Dactyl Belongs in Your Pocket\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2.98 inch CPM-MagnaCut drop point at 62-63 HRC with a full flat grind.\u003c\/li\u003e\n\u003cli\u003eBolster frame lock - a separate bolster carries the lock, so the scale material never weakens it.\u003c\/li\u003e\n\u003cli\u003eFront flipper with a fuller groove: two ways to open, no tab hanging off the tang.\u003c\/li\u003e\n\u003cli\u003eCaged ceramic bearings for a glassy, consistent swing.\u003c\/li\u003e\n\u003cli\u003eTitanium frame with black canvas micarta inlay at only 106.5 g (3.76 oz).\u003c\/li\u003e\n\u003cli\u003eMachine satin + flat satin blade finish that suits the material package.\u003c\/li\u003e\n\u003cli\u003eTip-up titanium clip that rides deep and does not shred a pocket seam.\u003c\/li\u003e\n\u003cli\u003eDesigned by Caveman EDC - compact, tight-tolerance and material-heavy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBest Uses for the Dactyl BT2608A\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDiscreet office and city carry where you want a real knife that does not print.\u003c\/li\u003e\n\u003cli\u003eCollector rotation - a front flipper that is as satisfying to open as it looks.\u003c\/li\u003e\n\u003cli\u003eDress and event carry, where a titanium frame reads better than a black polymer handle.\u003c\/li\u003e\n\u003cli\u003eTravel kit for hikers who want one small blade that handles food, cord and packaging.\u003c\/li\u003e\n\u003cli\u003eA first serious front flipper for someone moving up from a liner lock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat steel is the Dactyl BT2608A blade?\u003c\/strong\u003e\u003cbr\u003eCPM-MagnaCut, flat ground and run at 62-63 HRC. MagnaCut is Crucible's powder-metallurgy stainless, built to hold toughness and corrosion resistance at high hardness instead of trading one for the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a bolster frame lock?\u003c\/strong\u003e\u003cbr\u003eThe lock bar is a separate bolster piece rather than a cut-out section of the handle scale. That lets the frame carry a micarta or carbon inlay without removing the material the lock needs, and it keeps the lock face aligned to the tang.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a front flipper hard to use?\u003c\/strong\u003e\u003cbr\u003eIt takes a day to learn and then it is faster than a thumb stud. Push the tab on the blade spine forward with your index finger as the knife clears your pocket; the fuller groove is there as a second, pinch-grip option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big is the Dactyl?\u003c\/strong\u003e\u003cbr\u003eOpen it is 7.26\" (184.3 mm), closed 4.28\" (108.6 mm), blade thickness 0.15\" (3.8 mm), and it weighs 106.5 g (3.76 oz). That is a compact folder - a three-and-a-half finger grip for most hands, and it disappears in a jeans pocket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the titanium frame scratch?\u003c\/strong\u003e\u003cbr\u003eYes - brushed, stonewashed and bead-blasted titanium all pick up fine marks with carry. That is normal for the material and part of how a titanium frame ages; the inlay panels are the parts that stay visually clean.\u003c\/p\u003e\n\u003ch3\u003eCPM-MagnaCut vs. Common Folding Knife Steels\u003c\/h3\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSteel\u003c\/th\u003e\n\u003cth\u003eTypical HRC\u003c\/th\u003e\n\u003cth\u003eEdge Retention\u003c\/th\u003e\n\u003cth\u003eCorrosion Resistance\u003c\/th\u003e\n\u003cth\u003eToughness\u003c\/th\u003e\n\u003cth\u003eSharpening Ease\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPM-MagnaCut (this knife)\u003c\/td\u003e\n\u003ctd\u003e62-63\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eModerate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPM-S35VN\u003c\/td\u003e\n\u003ctd\u003e59-61\u003c\/td\u003e\n\u003ctd\u003eVery Good\u003c\/td\u003e\n\u003ctd\u003eVery Good\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003ctd\u003eModerate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPM-20CV \/ M390\u003c\/td\u003e\n\u003ctd\u003e60-62\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eVery Good\u003c\/td\u003e\n\u003ctd\u003eFair\u003c\/td\u003e\n\u003ctd\u003eHard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCPM-154\u003c\/td\u003e\n\u003ctd\u003e59-61\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003ctd\u003eVery Good\u003c\/td\u003e\n\u003ctd\u003eVery Good\u003c\/td\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e14C28N\u003c\/td\u003e\n\u003ctd\u003e58-61\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003ctd\u003eVery Easy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD2 Tool Steel\u003c\/td\u003e\n\u003ctd\u003e58-61\u003c\/td\u003e\n\u003ctd\u003eVery Good\u003c\/td\u003e\n\u003ctd\u003eFair\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003ctd\u003eModerate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8Cr13MoV\u003c\/td\u003e\n\u003ctd\u003e57-59\u003c\/td\u003e\n\u003ctd\u003eFair\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003ctd\u003eVery Easy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eCPM-MagnaCut is Crucible's powder-metallurgy steel built by Larrin Thomas around one idea: remove the chromium carbides that normally force you to trade toughness for stainlessness. Roughly 1.15 percent carbon, 10.7 percent chromium, plus vanadium and niobium, hardened to 62-63 HRC on the Dactyl. In practice that means a blade that will not rust in a sweaty pocket, will not chip when you cut into something harder than you expected, and still out-cuts most stainless at the same hardness because the remaining carbides are small and evenly distributed. What it is not is cheap - and it responds badly to a lazy heat treat, which is why the maker's 62-63 HRC figure matters. HRC figures are typical mill ranges, not a guarantee for any single blade.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eGlossary of Key Terms\u003c\/h2\u003e\n\u003cstrong\u003eBestech Knives\u003c\/strong\u003e\u003cbr\u003eA Chinese production knife brand working with independent designers to deliver mid-to-premium folders with modern steels and tight manufacturing tolerances.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDactyl\u003c\/strong\u003e\u003cbr\u003eBestech's premium front-flipper folder: a 2.98 inch CPM-MagnaCut blade at 62-63 HRC on a 7.26 inch titanium frame with bolster frame lock, 106-126 g depending on the inlay.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCaveman EDC\u003c\/strong\u003e\u003cbr\u003eThe designer behind the Dactyl - known for compact, tight-tolerance front flippers with heavy material play (titanium, Timascus, CamoCarbon) rather than plain slab construction.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCPM-MagnaCut\u003c\/strong\u003e\u003cbr\u003eCrucible's powder-metallurgy stainless at 62-63 HRC here. Built to remove chromium carbides, so it holds toughness and corrosion resistance at the same hardness instead of trading one for the other.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBolster Frame Lock\u003c\/strong\u003e\u003cbr\u003eA frame lock where the lock bar is a separate bolster rather than a cut section of the handle scale. It lets the frame carry an inlay without weakening the lock, and it keeps the lock face perfectly aligned.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFront Flipper\u003c\/strong\u003e\u003cbr\u003eA tab on the spine of the blade rather than at the tang. You push it forward with your index finger; it reads cleaner in the pocket than a rear flipper tab.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFuller\u003c\/strong\u003e\u003cbr\u003eThe groove milled along the blade flats. On the Dactyl it doubles as a pinch-grip opening method and takes a little weight out of the blade without thinning the spine.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCeramic Ball Bearing\u003c\/strong\u003e\u003cbr\u003eHardened ceramic balls in a steel cage around the pivot. The action stays glassy for years, and ceramic will not rust or flat-spot the way bronze washers do.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTimascus\u003c\/strong\u003e\u003cbr\u003ePattern-welded titanium alloy rather than steel: two titanium alloys forge-welded and etched so the layers read as a bar-stock pattern. It is light, corrosion proof and expensive.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCamoCarbon\u003c\/strong\u003e\u003cbr\u003eA layered carbon-fibre composite with a camouflage-style pattern, used here as an inlay panel in the titanium frame.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCanvas Micarta\u003c\/strong\u003e\u003cbr\u003eLayers of canvas cloth pressed into a phenolic resin. It grips better when wet than when dry and takes on a patina rather than scratching.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBead Blasted Finish\u003c\/strong\u003e\u003cbr\u003eFine glass bead media blasted at the titanium to produce a uniform matte surface. It kills glare and hides fingerprints, but it marks more easily than a stonewash.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e62-63 HRC\u003c\/strong\u003e\u003cbr\u003eThe Rockwell hardness band Bestech specifies for the Dactyl. Hard enough to hold a fine apex under real cutting load without going brittle.\u003cbr\u003e\u003cbr\u003e\n\u003ch2\u003eWho Should Buy the Dactyl BT2608A\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBuyers who want custom-adjacent materials at a production price.\u003c\/li\u003e\n\u003cli\u003eAnyone who prefers a front flipper over a rear tab for cleaner pocket carry.\u003c\/li\u003e\n\u003cli\u003eCollectors building a Caveman EDC set across the inlay variants.\u003c\/li\u003e\n\u003cli\u003eUsers who want a 3-inch blade that still feels like a serious tool.\u003c\/li\u003e\n\u003cli\u003eLeft-field gift buyers looking for something a knife person will not already own.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho Should Skip It\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBuyers who need a large blade - 2.98 inches is deliberately compact.\u003c\/li\u003e\n\u003cli\u003eAnyone who wants a $50 working knife; the materials are the price.\u003c\/li\u003e\n\u003cli\u003eUsers who dislike fidget-oriented opening - this knife is built around it.\u003c\/li\u003e\n\u003cli\u003ePeople who will not maintain a high-hardness edge; 62-63 HRC rewards a light touch.\u003c\/li\u003e\n\u003cli\u003eLeft-handers wanting a mirrored clip position - the clip is right-hand tip-up only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCare \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWipe the blade dry after every use - MagnaCut is close to saltwater-grade stainless, but pocket lint holds moisture against any steel.\u003c\/li\u003e\n\u003cli\u003eOne drop of light knife oil at the pivot every two to three months, then work the front flipper a dozen times so oil reaches the ceramic bearings.\u003c\/li\u003e\n\u003cli\u003eBlow lint out of the bolster recess and around the lock bar before oiling; grit under the bolster is the usual cause of a gritty action.\u003c\/li\u003e\n\u003cli\u003eSharpen on a diamond plate or a 1000-grit water stone at 15-18 degrees per side; 62-63 HRC grinds slower than a soft stainless, so let the stone cut instead of forcing it.\u003c\/li\u003e\n\u003cli\u003eDeburr on plain leather or a fine ceramic rod with almost no pressure - the fine carbide structure will hold a wire burr if you over-work the apex.\u003c\/li\u003e\n\u003cli\u003eSkip harsh solvents on the inlay seams; micarta and CamoCarbon both cloud if you hit them with acetone or brake cleaner.\u003c\/li\u003e\n\u003cli\u003eWipe the titanium frame with a dry microfibre cloth rather than polish - fingerprints buff out, scratches do not.\u003c\/li\u003e\n\u003cli\u003eCheck the pivot, clip and body screws every few months with the correct Torx driver; titanium frames do not compress, but threads still back out.\u003c\/li\u003e\n\u003cli\u003eNever pry, twist or use the tip as a screwdriver - a 2.98 inch blade at 3.8 mm thick has very little lateral leverage to spare.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"Product\",\n  \"name\": \"Bestech Dactyl BT2608A Magnacut Blade Titanium with Micarta Handle Bolster Frame Lock Folding Knife\",\n  \"sku\": \"BT2608A\",\n  \"mpn\": \"BT2608A\",\n  \"productID\": \"BT2608A\",\n  \"description\": \"Bestech Dactyl BT2608A front flipper folding knife with a 2.98 inch CPM-MagnaCut drop point blade at 62-63 HRC, black canvas micarta inlay on a titanium bolster frame lock, ceramic bearings and a black PVD titanium clip.\",\n  \"brand\": { \"@type\": \"Brand\", \"name\": \"Bestech Knives\" },\n  \"manufacturer\": { \"@type\": \"Organization\", \"name\": \"Bestech Knives\" },\n  \"material\": \"CPM-MagnaCut Stainless Steel, Titanium and CamoCarbon or Micarta\",\n  \"color\": \"Black\",\n    \"weight\": { \"@type\": \"QuantitativeValue\", \"value\": 106.5, \"unitCode\": \"GRM\" },\n  \"category\": \"Knives\",\n  \"additionalProperty\": [\n      { \"@type\": \"PropertyValue\", \"name\": \"Brand\", \"value\": \"Bestech Knives\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Model\", \"value\": \"Dactyl BT2608A\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Model Number\", \"value\": \"BT2608A\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Product Type\", \"value\": \"Folding Knife\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Material\", \"value\": \"CPM-MagnaCut Stainless Steel\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Handle Material\", \"value\": \"Titanium frame with Black Canvas Micarta Inlay\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Lock Type\", \"value\": \"Bolster Frame Lock\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Blade Style\", \"value\": \"Drop Point\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Blade Grind\", \"value\": \"Flat\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Blade Finish\", \"value\": \"Machine Satin + Flat Satin\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Overall Length\", \"value\": \"7.26\\\" (184.3 mm)\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Blade Length\", \"value\": \"2.98\\\" (75.7 mm)\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Blade Thickness\", \"value\": \"0.15\\\" (3.8 mm)\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Weight\", \"value\": \"106.5 g (3.76 oz)\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Designer\", \"value\": \"Caveman EDC\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Carry\", \"value\": \"Titanium pocket clip, tip-up\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Hardness\", \"value\": \"62-63 HRC\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Opening\", \"value\": \"Front flipper and fuller, ceramic ball bearings\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Pivot\", \"value\": \"Caged ceramic ball bearings\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Clip\", \"value\": \"Titanium, black PVD titanium\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Closed Length\", \"value\": \"4.28\\\" (108.6 mm)\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Frame Material\", \"value\": \"Titanium\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Inlay Material\", \"value\": \"Black Canvas Micarta Inlay\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Blade Material Type\", \"value\": \"Powder metallurgy stainless\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Country of Origin\", \"value\": \"China\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"SKU\", \"value\": \"BT2608A\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Price\", \"value\": \"263.00\" },\n      { \"@type\": \"PropertyValue\", \"name\": \"Availability\", \"value\": \"InStock\" }\n  ],\n  \"offers\": {\n    \"@type\": \"Offer\",\n    \"url\": \"https:\/\/edcmall.cn\/products\/bestech-dactyl-bt2608a\",\n    \"priceCurrency\": \"USD\",\n    \"price\": \"263.00\",\n    \"availability\": \"https:\/\/schema.org\/InStock\",\n    \"itemCondition\": \"https:\/\/schema.org\/NewCondition\"\n  }\n}\n\u003c\/script\u003e","brand":"Bestech Knives","offers":[{"title":"Default Title","offer_id":50844534735045,"sku":"BT2608A","price":263.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/0699\/4117\/files\/01_39e05cc9-3f8f-429c-8993-0b867d490245.jpg?v=1793347802","url":"https:\/\/edcmall.cn\/es\/products\/bestech-dactyl-bt2608a","provider":"EDCMALL","version":"1.0","type":"link"}