描述
Trivisa Hornet-08L JM01-LA-14 folding knife pairs a corrosion-resistant 14C28N stainless steel blade with a lightweight aluminum and G10 handle for dependable everyday carry and outdoor utility. Its drop-point profile offers versatile cutting performance, while the hand-satin finish gives the blade a clean look. A smooth ceramic ball-bearing pivot supports fluid opening, and the axis lock helps secure the blade during use. Heat-treated to 58–60 HRC, the steel balances corrosion resistance with straightforward sharpening and practical edge performance. Measuring 7.87 inches open, it has a 3.34-inch blade and weighs 5.12 ounces. Suitable for EDC, hiking, camping, fishing, and general outdoor tasks, it offers a capable, low-maintenance option for users seeking a versatile folding knife. Regular touch-ups may be needed after demanding abrasive cutting.
14C28N Blade Introduction
14C28N is a high-value budget-to-midrange stainless steel that excels in corrosion resistance and ease of sharpening, making it a low-maintenance workhorse for EDC and wet environments, but it falls short of premium steels in edge retention and requires more frequent touch-ups when cutting highly abrasive materials like cardboard.
SPECIFICATIONS
Designer:TRIVISA team
Style:Drop Point
Blade Material:14C28N steel
Blade Finished:Hand satin
Handle Material:Aluminium and G10
Lock Style:Axis lock
Hardness:58-60HRC
Bearing:Ceramic ball bearing
Size:
Overall length-7.87"(200mm)
Blade length-3.34" (85mm)
Closed length-4.52"(114.5mm)
Blade width-1.22''(31mm)
Blade thickness-0.13''(3.5mm)
Net Weight:5.12oz(145.2g)
Usage:Outdoor survival,EDC,hunting,fishing, hiking and camping
Trivisa Hornet-08L JM01-LA-14 - Product Description
The Trivisa Hornet-08L JM01-LA-14 is a drop point folding knife from Trivisa: a 3.34-inch 14C28N blade in hand satin, an axis lock and a Aluminium + G10 handle at 5.12 ounces. The full-size workhorse of the range: a 3.34-inch 14C28N drop point on an ambidextrous axis lock, wrapped in anodised aluminium with a G10 insert. At 5.12 ounces it has the mass for glove-on jobs, and the ceramic-bearing pivot stays smooth after grit and dust. It sits in 14C28N steel company and belongs in Trivisa knives — and if you are comparing mechanisms, see the daily carry lineup below; the specs and the honest trade-offs are all here.
The 14C28N Edge
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.
Belongs in Your Work Kit
- 14C28N blade steel — excellent corrosion resistance and genuinely easy sharpening for a low-maintenance daily edge
- Ambidextrous axis lock — pull the bar, the blade drops free; your fingers never cross the closing path
- Aluminium + G10 handle, 5.12 oz — light, dimensionally stable scales with a full four-finger grip
- Axis Lock — ambidextrous release, no fingers in the blade path, and a bar that self-adjusts as it wears
- Ceramic ball bearings in the pivot: a glassy one-hand flick that stays smooth with almost no oil
- 58-60 HRC heat treat — hard enough to hold a working edge, tough enough not to chip on a dropped cut
- 3.5 mm blade stock — stiff enough for hard push cuts, thin enough behind the edge to slice
- TRIVISA in-house design — branded fit and finish at a price the big brands reserve for catalog work
Five Ways You Will Actually Use It
- Gloved work: the wide handle fills a work glove and the axis release works without hunting for a liner or button.
- Everyday pocket duty: at 5.12 oz and 4.52" closed, it disappears in a front pocket; the release works one-handed.
- Boxes and packaging: the 3.34" drop point blade goes through tape and corrugated cleanly, and 14C28N touches up in seconds afterwards.
- Camp and trail: food prep, cordage, kindling and zip ties; wipe the blade dry and it goes straight back in the pocket.
- Gift for a knife person: real 14C28N steel, a Axis Lock and Aluminium + G10 scales read as a serious tool, not a gas-station special.
Frequently Asked Questions
Is the aluminium handle cold or slippery in winter?
Anodised aluminium feels cold for a moment but the G10 insert and the handle contour keep a secure grip; unlike bare metal it will not corrode from sweat, and the anodised colour is a hard oxide layer, not paint.
Is 14C28N good steel for a folding knife?
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.
How does the axis-style crossbar lock work?
Pull the crossbar back with thumb and index finger and the blade drops free; release it and the bar snaps behind the tang. Your fingers never cross the closing path, and it works equally well left- or right-handed.
Will the Aluminium + G10 handle hold up?
Anodised aluminium scales with a G10 insert: light, stiff and dimensionally stable in heat, cold and wet conditions.
Steel Comparison Table
How 14C28N stacks up against steels you will meet at this price:
| Steel | Typical HRC | Edge Retention | Corrosion Resistance | Toughness | Sharpening Ease |
|---|---|---|---|---|---|
| 14C28N | 58-62 | Good | Excellent | Very good | Very easy |
| AUS-8 | 56-58 | Fair | Good | Very good | Very easy |
| 440C | 56-59 | Good | Very good | Good | Easy |
| D2 | 55-61 | Very good | Fair (semi-stainless) | Good | Moderate |
Terms Worth Knowing
14C28N14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use.
Axis-Style Crossbar Lock
A sliding bar engages the blade tang from behind. Ambidextrous, self-adjusting for wear, and safe to release under load.
Anodised Aluminium
Aluminium with an electrochemically grown hard oxide layer: corrosion-proof, colour-fast and lighter than titanium.
Drop Point
A convex spine curving to the tip: strong, controllable, and the default all-purpose utility profile.
PVD Coating
Physical Vapor Deposition: a vapor-bonded ceramic-metallic layer far harder and more wear-resistant than paint or plating.
Stonewash Finish
Abrasive tumbling that leaves a mottled grey surface which hides scratches and daily wear.
Micarta
Resin-pressed linen, canvas or paper laminate: shock-absorbing, grippy when wet, and it patinas with age.
G10
Fiberglass laminate prized for impact strength, chemical resistance and aggressive texture.
Carbon Fiber
Woven carbon strands in resin — high stiffness at very low weight, with a visible weave.
Titanium
Aerospace metal for handle scales: strong, light, corrosion-proof and heat-anodizable for colour.
Ultem PEI
A high-strength amber thermoplastic: chemically inert, moisture-proof and much lighter than metal.
Copper
Solid copper scales add weight and develop a one-of-a-kind dark patina with handling.
Ceramic Ball Bearings
Ceramic races in the pivot instead of washers: smoother action, longer life, less oil.
HRC
Rockwell hardness scale C. Most quality blades run 55-62 HRC: harder holds an edge longer, softer tolerates abuse.
Drop Point Blade
The drop point profile used here, chosen for controlled cutting in everyday and outdoor work.
Who Should Buy It
- You want a glove-friendly, ambidextrous work folder with real presence in the hand
- You prefer a low-maintenance steel that shrugs off rain and sweat
- You want real 14C28N steel and a Axis Lock at this price instead of mystery stainless
- You value Aluminium + G10 scales for grip and long-term durability
- You carry a knife every day and want branded fit and finish without premium pricing
Who Should Skip It
- You want a sub-3-ounce city knife — this is a 5.12-ounce work tool
- You collect premium super steels; 14C28N is a workhorse, not a status alloy
- You want a serrated edge — this is a plain-edge slicer
- You expect a fidget-toy action with zero break-in; give the pivot a week
Care & Maintenance
- Wipe the blade with a dry cloth after every use, especially after cutting fruit, tape or wet material.
- Wash with warm water and a drop of dish soap when needed; never run the pivot under a pressurized stream.
- Dry the knife completely before closing or storing it — trapped moisture is the main corrosion risk.
- Add a small drop of quality oil to the pivot and ceramic bearings every 4-6 weeks of regular use.
- Touch up the edge on a 1000-grit stone, then finish with a few light strokes on a ceramic rod or strop.
- Check the pivot screws periodically and re-tighten them evenly; do not over-torque.
- Store the knife dry and open or loosely closed; avoid leather sheaths for long-term storage.
- Keep Micarta, G10, aluminium and carbon fiber scales clean with soapy water and a soft brush; no solvents needed.
- Inspect the lock engagement before each heavy task — a clean click or snap means the lock is seated.
Compare it directly with other 14C28N steel knives, more Axis Lock knives, and the full knives catalog — or the best sellers list — before you commit.
付款与安全
您的付款信息将得到安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。
Delivery and Shipping
In-stock orders will be shipped in 48 hours except weekend and holidays.
Pre-orders pls subject to the indicated Pre-order shipping dates.
From China warehouse: Estimated delivery in 15–21 business days







