Trivisa Hornet-08L JM01-LA-14 14C28N Blade Aluminium Handle Axis Lock Folding Knife

New
Trivisa KnivesSKU: JM01-LA-14

Precio:
Precio de venta$89.99 USD

Descripción

Trivisa Hornet-08L JM01-LA-14 folding knife pairs a corrosion-resistant 14C28N stainless steel blade with a lightweight aluminum and G10 handle for dependable everyday carry and outdoor utility. Its drop-point profile offers versatile cutting performance, while the hand-satin finish gives the blade a clean look. A smooth ceramic ball-bearing pivot supports fluid opening, and the axis lock helps secure the blade during use. Heat-treated to 58–60 HRC, the steel balances corrosion resistance with straightforward sharpening and practical edge performance. Measuring 7.87 inches open, it has a 3.34-inch blade and weighs 5.12 ounces. Suitable for EDC, hiking, camping, fishing, and general outdoor tasks, it offers a capable, low-maintenance option for users seeking a versatile folding knife. Regular touch-ups may be needed after demanding abrasive cutting.

14C28N Blade Introduction

14C28N is a high-value budget-to-midrange stainless steel that excels in corrosion resistance and ease of sharpening, making it a low-maintenance workhorse for EDC and wet environments, but it falls short of premium steels in edge retention and requires more frequent touch-ups when cutting highly abrasive materials like cardboard.

SPECIFICATIONS

Designer:TRIVISA team
Style:Drop Point
Blade Material:14C28N steel
Blade Finished:Hand satin
Handle Material:Aluminium and G10
Lock Style:Axis lock
Hardness:58-60HRC
Bearing:Ceramic ball bearing

Size:
Overall length-7.87"(200mm)
Blade length-3.34" (85mm)
Closed length-4.52"(114.5mm)
Blade width-1.22''(31mm)
Blade thickness-0.13''(3.5mm)
Net Weight:5.12oz(145.2g)

Usage:Outdoor survival,EDC,hunting,fishing, hiking and camping

Trivisa Hornet-08L JM01-LA-14 - Product Description

The Trivisa Hornet-08L JM01-LA-14 is a drop point folding knife from Trivisa: a 3.34-inch 14C28N blade in hand satin, an axis lock and a Aluminium + G10 handle at 5.12 ounces. The full-size workhorse of the range: a 3.34-inch 14C28N drop point on an ambidextrous axis lock, wrapped in anodised aluminium with a G10 insert. At 5.12 ounces it has the mass for glove-on jobs, and the ceramic-bearing pivot stays smooth after grit and dust. It sits in 14C28N steel company and belongs in Trivisa knives — and if you are comparing mechanisms, see the daily carry lineup below; the specs and the honest trade-offs are all here.

The 14C28N Edge

14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.

Belongs in Your Work Kit

  • 14C28N blade steel — excellent corrosion resistance and genuinely easy sharpening for a low-maintenance daily edge
  • Ambidextrous axis lock — pull the bar, the blade drops free; your fingers never cross the closing path
  • Aluminium + G10 handle, 5.12 oz — light, dimensionally stable scales with a full four-finger grip
  • Axis Lock — ambidextrous release, no fingers in the blade path, and a bar that self-adjusts as it wears
  • Ceramic ball bearings in the pivot: a glassy one-hand flick that stays smooth with almost no oil
  • 58-60 HRC heat treat — hard enough to hold a working edge, tough enough not to chip on a dropped cut
  • 3.5 mm blade stock — stiff enough for hard push cuts, thin enough behind the edge to slice
  • TRIVISA in-house design — branded fit and finish at a price the big brands reserve for catalog work

Five Ways You Will Actually Use It

  • Gloved work: the wide handle fills a work glove and the axis release works without hunting for a liner or button.
  • Everyday pocket duty: at 5.12 oz and 4.52" closed, it disappears in a front pocket; the release works one-handed.
  • Boxes and packaging: the 3.34" drop point blade goes through tape and corrugated cleanly, and 14C28N touches up in seconds afterwards.
  • Camp and trail: food prep, cordage, kindling and zip ties; wipe the blade dry and it goes straight back in the pocket.
  • Gift for a knife person: real 14C28N steel, a Axis Lock and Aluminium + G10 scales read as a serious tool, not a gas-station special.

Frequently Asked Questions

Is the aluminium handle cold or slippery in winter?

Anodised aluminium feels cold for a moment but the G10 insert and the handle contour keep a secure grip; unlike bare metal it will not corrode from sweat, and the anodised colour is a hard oxide layer, not paint.

Is 14C28N good steel for a folding knife?

14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.

How does the axis-style crossbar lock work?

Pull the crossbar back with thumb and index finger and the blade drops free; release it and the bar snaps behind the tang. Your fingers never cross the closing path, and it works equally well left- or right-handed.

Will the Aluminium + G10 handle hold up?

Anodised aluminium scales with a G10 insert: light, stiff and dimensionally stable in heat, cold and wet conditions.

Steel Comparison Table

How 14C28N stacks up against steels you will meet at this price:

Steel Typical HRC Edge Retention Corrosion Resistance Toughness Sharpening Ease
14C28N 58-62 Good Excellent Very good Very easy
AUS-8 56-58 Fair Good Very good Very easy
440C 56-59 Good Very good Good Easy
D2 55-61 Very good Fair (semi-stainless) Good Moderate

Terms Worth Knowing

14C28N
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use.

Axis-Style Crossbar Lock
A sliding bar engages the blade tang from behind. Ambidextrous, self-adjusting for wear, and safe to release under load.

Anodised Aluminium
Aluminium with an electrochemically grown hard oxide layer: corrosion-proof, colour-fast and lighter than titanium.

Drop Point
A convex spine curving to the tip: strong, controllable, and the default all-purpose utility profile.

PVD Coating
Physical Vapor Deposition: a vapor-bonded ceramic-metallic layer far harder and more wear-resistant than paint or plating.

Stonewash Finish
Abrasive tumbling that leaves a mottled grey surface which hides scratches and daily wear.

Micarta
Resin-pressed linen, canvas or paper laminate: shock-absorbing, grippy when wet, and it patinas with age.

G10
Fiberglass laminate prized for impact strength, chemical resistance and aggressive texture.

Carbon Fiber
Woven carbon strands in resin — high stiffness at very low weight, with a visible weave.

Titanium
Aerospace metal for handle scales: strong, light, corrosion-proof and heat-anodizable for colour.

Ultem PEI
A high-strength amber thermoplastic: chemically inert, moisture-proof and much lighter than metal.

Copper
Solid copper scales add weight and develop a one-of-a-kind dark patina with handling.

Ceramic Ball Bearings
Ceramic races in the pivot instead of washers: smoother action, longer life, less oil.

HRC
Rockwell hardness scale C. Most quality blades run 55-62 HRC: harder holds an edge longer, softer tolerates abuse.

Drop Point Blade
The drop point profile used here, chosen for controlled cutting in everyday and outdoor work.

Who Should Buy It

  • You want a glove-friendly, ambidextrous work folder with real presence in the hand
  • You prefer a low-maintenance steel that shrugs off rain and sweat
  • You want real 14C28N steel and a Axis Lock at this price instead of mystery stainless
  • You value Aluminium + G10 scales for grip and long-term durability
  • You carry a knife every day and want branded fit and finish without premium pricing

Who Should Skip It

  • You want a sub-3-ounce city knife — this is a 5.12-ounce work tool
  • You collect premium super steels; 14C28N is a workhorse, not a status alloy
  • You want a serrated edge — this is a plain-edge slicer
  • You expect a fidget-toy action with zero break-in; give the pivot a week

Care & Maintenance

  1. Wipe the blade with a dry cloth after every use, especially after cutting fruit, tape or wet material.
  2. Wash with warm water and a drop of dish soap when needed; never run the pivot under a pressurized stream.
  3. Dry the knife completely before closing or storing it — trapped moisture is the main corrosion risk.
  4. Add a small drop of quality oil to the pivot and ceramic bearings every 4-6 weeks of regular use.
  5. Touch up the edge on a 1000-grit stone, then finish with a few light strokes on a ceramic rod or strop.
  6. Check the pivot screws periodically and re-tighten them evenly; do not over-torque.
  7. Store the knife dry and open or loosely closed; avoid leather sheaths for long-term storage.
  8. Keep Micarta, G10, aluminium and carbon fiber scales clean with soapy water and a soft brush; no solvents needed.
  9. Inspect the lock engagement before each heavy task — a clean click or snap means the lock is seated.

Compare it directly with other 14C28N steel knives, more Axis Lock knives, and the full knives catalog — or the best sellers list — before you commit.

Pago y seguridad

Apple Pay Google Pay Mastercard Shop Pay Union Pay Visa

Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

Entrega y envío

Los pedidos en stock se enviarán en 48 horas, excepto fines de semana y festivos.

Los pedidos anticipados están sujetos a las fechas de envío indicadas para pedidos anticipados.

Desde el almacén de China: Entrega estimada en 15 a 21 días hábiles

También te puede interesar

Visto recientemente