Bestech Irida BG25H 14C28N Blade G10 Handle Liner Lock Folding Knife

The Bestech Irida BG25H represents a refined approach to everyday carry design, engineered for those who demand both performance and precision. Built around a 14C28N stainless steel blade with a sophisticated black stonewash finish, this knife delivers excellent edge retention and corrosion resistance—ideal for sustained cutting tasks. The blade measures 3.82 inches and maintains a lean 0.15-inch profile, balancing cutting efficiency with controlled handling. The G10 handle in beige provides superior grip security and durability across varied conditions, while the titanium clip ensures reliable pocket retention without adding unnecessary weight. A ceramic ball bearing system enables smooth, responsive blade deployment with minimal play, essential for consistent one-handed operation. The liner lock mechanism offers dependable blade security during use and safe closure. At 123 grams with an overall length of 8.74 inches when open and 4.92 inches closed, the Iirda achieves excellent portability without compromising functional reach. Designer KOMBOU's attention to ergonomic balance makes this knife equally suited for tactical applications, outdoor work, or refined daily carry. A precision instrument for discerning users who value engineering excellence.

 

SPECIFICATIONS

Blade Material: 14C28N
Blade Finish: Black Stonewash
Handle Material: G10

Clip Material: Titanium
Describe: Liner Lock
Handle Color: Beige

Ball Bearing: Ceramic
Overall Length: 8.74" (222 mm)
Closed Length: 4.92"(125 mm)

Blade Length: 3.82"(97 mm)
Blade Thickness: 0.15"(3.8mm)
Knife Weight: 123g
Designer: KOMBOU

Bestech Irida BG25H - Black Stonewash 14C28N Drop Point with Beige G10 and a Fuller

The Bestech Irida BG25H by KOMBOU: a 3.82 inch 14C28N drop point in black stonewash with a machined fuller, beige G10 handle, liner lock and titanium clip at 123 g (4.34 oz). More folding knives at EDCMALL.

A Full-Size Liner Lock Built Around a Genuine Work Blade

The Irida is the big knife in this batch: 3.82 inches of 14C28N on 3.8 mm stock, black stonewashed, with a long fuller machined into the flat to lighten the blade and draw the eye. KOMBOU's beige G10 scales are sculpted with deep grooves that index the fingers, and the black two-stage titanium clip rides the handle without adding bulk. Sandvik 14C28N at 58-61 HRC is the right steel for a full-size work folder - corrosion-proof, chip-resistant and back to sharp in minutes. Compare 14C28N with D2, Nitro-V and 154CM in the table below.

Why the Irida BG25H Belongs in Your Pocket

• 3.82 inch 14C28N drop point at 58-61 HRC on 3.8 mm stock.
• Long machined fuller that lightens the blade and sharpens the silhouette.
• Black stonewash finish that hides carry scratches and kills glare.
• Sculpted beige G10 scales with deep finger-indexing grooves.
• Black two-stage titanium pocket clip - springy, low-ride, tip-up.
• Ceramic ball bearing pivot for a smooth, responsive swing.
• Steel liner lock with dependable, one-hand-safe closure.
• 123 g (4.34 oz) and 8.74" (222 mm) open - full-size reach without excess weight.

Best Uses for the Irida BG25H

• Full-size work duty: cardboard, strapping, cordage on a genuine 3.82 inch edge.
• Outdoor and tactical carry where reach and a secure liner lock matter.
• Field dressing and camp tasks using the deep drop-point belly.
• Users with large hands who need a real four-finger grip.
• Everyday carry for anyone who wants a big blade that still rides discreetly on a low clip.

Frequently Asked Questions

What steel is the Irida blade?
Sandvik 14C28N nitrogen stainless at 58-61 HRC with a black stonewash finish. It is corrosion-proof, chip-resistant and famously easy to sharpen; expect more frequent touch-ups than a super steel under abrasive work.

Who designed it?
KOMBOU, the design studio behind the Irida's sculpted G10, machined fuller and two-stage titanium clip.

What is the fuller for?
The groove lightens the blade without thinning the spine, and it gives the eye a clean line to follow - function and silhouette in one cut.

What is the handle made of?
Beige G10 with deep machined grooves over a steel frame, plus a black two-stage titanium pocket clip. G10 is moisture-proof and grips even when wet.

How big is it?
8.74" (222 mm) open, 4.92" (125 mm) closed, 3.82" (97 mm) blade at 0.15" (3.8 mm), and 123 g (4.34 oz) - a full-size folder with work-capable reach.

Sandvik 14C28N vs. Common Pocket Knife Steels

Steel	Typical HRC	Edge Retention	Corrosion Resistance	Toughness	Sharpening Ease
14C28N (this knife)	59-61	Good	Excellent	Good	Very Easy
Nitro-V	59-61	Good	Very Good	Better	Easy
154CM	58-61	Good	Good	Very Good	Moderate
CPM-S35VN	58-60	Very Good	Very Good	Better	Moderate
D2 Tool Steel	58-61	Very Good	Fair	Good	Moderate
8Cr13MoV	57-59	Fair	Good	Good	Very Easy

Sandvik 14C28N is a nitrogen-refined martensitic stainless that lands at 58-61 HRC in production heat treats. On a value folder it is the smart pick: corrosion resistance that survives wet weather and pocket sweat, a fine stable edge that refuses to chip, and sharpening so easy a few passes on a pocket stone restore the apex. The trade is raw wear resistance - expect more frequent touch-ups than a high-vanadium super steel under abrasive cardboard work. HRC figures are typical mill ranges, not a guarantee for any single blade.

Glossary of Key Terms

Bestech Knives
A Chinese production knife brand working with independent designers to deliver mid-to-premium folders with modern steels and tight tolerances.

Irida
Bestech's full-size liner-lock folder designed by KOMBOU: a 3.82 inch 14C28N drop point with a fuller, beige G10 scales and a titanium clip, 123 g.

KOMBOU
The design studio credited on the Irida - sculpted G10 with machined grooves, a two-stage pocket clip and an organic handle flow.

Sandvik 14C28N
A nitrogen-alloyed martensitic stainless at 58-61 HRC. Corrosion-proof, fine-grained, hard to chip and famously easy to sharpen.

Liner Lock
A strip of spring steel inside the handle that snaps sideways behind the blade tang when the blade opens. One thumb of the closing hand releases it.

Ceramic Ball Bearings
Hardened ceramic balls around the pivot. The action stays glassy for years, and ceramic will not rust or flat-spot.

Drop Point
A blade profile whose spine slopes down to the tip, leaving a deep belly for slicing and a strong point protected by the drop.

Fuller
A long groove machined along the blade flat. It lightens the blade without thinning the spine and gives the eye a clean line to follow.

G10 Scales
Fibreglass laminate pressed with epoxy. Practically indestructible, moisture-proof and textured for grip even when wet.

Black Stonewash Finish
A dark stonewashed treatment that reads black in low light and grey at the wear points. Hides scratches better than any satin.

Deep Carry Clip
A clip mounted high on the handle so the knife sits low in the pocket with only the clip showing.

Titanium Clip
A pocket clip milled from titanium: springy for years without fatigue and finished to match the stonewashed hardware.

Who Should Buy the Irida BG25H

• Buyers who want a genuine full-size 14C28N work folder under $100.
• Fans of KOMBOU's sculpted, grooved handle design language.
• Users with large hands who need real grip real estate.
• Anyone who wants a black blade, beige handle contrast look.
• Wet-climate carriers who want stainless steel and a moisture-proof handle.

Who Should Skip It

• Minimalists - at 8.74 inches open and 123 g this is a full-size folder.
• Super-steel chasers - 14C28N trades edge life for easy care.
• Anyone who wants an ambidextrous lock; the liner lock is right-hand oriented.
• Buyers who dislike light-coloured handles showing pocket wear.

Care & Maintenance

• Wipe the blade dry after every use; 14C28N is strongly stainless but pocket sweat still speckles bare steel over weeks.
• One drop of quality knife oil at the pivot monthly, then cycle the action so oil spreads across the ceramic bearing.
• Blow pocket lint out of the handle grooves and liner-lock track before oiling so grit never grinds the pivot.
• Sharpen on a 1000-grit water stone or diamond plate; 14C28N grinds fast and takes a keen edge in a handful of passes.
• Work the drop point in full-length heel-to-tip strokes; rocking on a stone rounds the tip.
• The black stonewash finish wears bright at the edge with use - exposed steel behaves the same, just lighter.
• Scrub the beige G10 scales with warm water, a drop of mild soap and a soft brush; the machined grooves hold lint.
• Check the titanium clip and body screws every month or two with the correct Torx driver.
• Never pry, twist or use the 3.8 mm-thick blade as a screwdriver; the tip is a cutter, not a lever.