描述
The Bestech Mothus BG67F combines a 14C28N stainless steel blade with a distinctive gold PVD finish and a blue-gray G10 handle. Designed by Grzegorz Grabarski, this folding knife features a crossbar lock and ceramic ball bearings for smooth, convenient operation. Its 3.47-inch blade and 8.05-inch overall length offer a practical size for everyday carry and outdoor use, while the 4.58-inch closed length makes it easy to store when not in use. The 3.5 mm-thick blade pairs with a lightweight 100 g build. 14C28N is known for corrosion resistance and straightforward sharpening, making it a practical choice for users seeking a capable, low-maintenance blade. The Mothus brings considered materials and clean styling to your daily gear.
14C28N Blade Introduction
14C28N is a high-value budget-to-midrange stainless steel that excels in corrosion resistance and ease of sharpening, making it a low-maintenance workhorse for EDC and wet environments, but it falls short of premium steels in edge retention and requires more frequent touch-ups when cutting highly abrasive materials like cardboard.
SPECIFICATIONS
Blade Material: 14C28N
Blade Finish: Gold PVD
Handle Material: G10
Describe: Bar lock
Handle Color: Blue Gray
Overall Length: 8.05"(204.5mm)
Closed Length: 4.58"(116.3mm)
Blade Length: 3.47"(88.2mm)
Blade Thickness: 0.14"(3.5mm)
Ball Bearing: Ceramic
Knife Weight: 100g
Designer: Grzegorz Grabarski
Bestech Mothus BG67F - Product Description
The Bestech Mothus BG67F is a drop point folding knife from Bestech: a 3.47-inch 14C28N blade in gold pvd, a crossbar lock and a Blue Gray G10 handle at 3.53 ounces, opened smoothly on ceramic ball bearings. A Grzegorz Grabarski design built around a slim, full-size EDC profile: a 3.47-inch 14C28N blade on ceramic ball bearings, an ambidextrous crossbar lock and a contoured G10 handle. At 8.05 inches open and 100 grams it carries flat but cuts like a full-size folder. Eight G10 colourways and matched blade finishes make it easy to pick a carry that looks like you. It sits in 14C28N steel company, belongs to the Mothus line, and if you are comparing mechanisms, see the daily carry lineup below; the specs and the honest trade-offs are all here.
The 14C28N Edge
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.
Belongs in Your Pocket
- 14C28N blade steel — excellent corrosion resistance and genuinely easy sharpening for a low-maintenance daily edge
- 3.47-inch 14C28N blade, 60 HRC — a low-care stainless edge that touches up in seconds
- Ambidextrous crossbar lock — pull the bar and the blade swings free; self-adjusting and safe under load
- Crossbar Lock — a sliding bar blocks the tang from behind — ambidextrous, self-adjusting for wear, safe to release under load
- Ceramic ball-bearing pivot — a glassy one-hand action that stays smooth with almost no oil
- 58-62 HRC heat treat — hard enough to hold a working edge, tough enough not to chip on a dropped cut
- 3.5 mm blade stock — stiff enough for hard push cuts, thin enough behind the edge to slice
- 8.05 in overall, 3.53 oz — real cutting reach without pocket-mounted bulk
- BESTECH production quality — tight tolerances, clean grinds and designer hardware at a working price
Five Ways You Will Actually Use It
- Everyday pocket duty: at 100 grams and 4.58 inches closed it rides a front pocket flat, and the crossbar release works one-handed either way.
- Everyday pocket duty: at 3.53 oz and 4.58" closed, it disappears in a front pocket and opens one-handed.
- Boxes and packaging: the 3.47" drop point blade goes through tape and corrugated cleanly, and 14C28N touches up in seconds afterwards.
- Camp and trail: food prep, cordage, kindling and zip ties; wipe the blade dry and it goes straight back in the pocket.
- Gift for a knife person: real 14C28N steel, a Crossbar Lock and Blue Gray G10 scales read as a serious tool, not a gas-station special.
Frequently Asked Questions
Is 14C28N a good steel for daily carry?
Yes for most people — 14C28N trades a little edge retention for outstanding stain resistance, real toughness and an edge you can bring back on a basic stone in under a minute. It is the right choice for a knife that gets wet, dirty and used hard.
Is 14C28N good steel for a folding knife?
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.
How does the crossbar (bar) lock work?
Pull the bar back with thumb and index finger and the blade swings free on its bearings; release it and the bar snaps behind the tang. Your fingers never cross the closing path, and it works equally well left- or right-handed.
Will the Blue Gray G10 handle hold up?
G10 is fiberglass laminate: it resists impact, moisture, solvents and temperature swings without swelling, and the colour runs through the layers rather than sitting in a coating.
Steel Comparison Table
How 14C28N stacks up against steels you will meet at this price:
| Steel | Typical HRC | Edge Retention | Corrosion Resistance | Toughness | Sharpening Ease |
|---|---|---|---|---|---|
| 14C28N | 58-62 | Good | Excellent | Very good | Very easy |
| AUS-8 | 56-58 | Fair | Good | Very good | Very easy |
| 440C | 56-59 | Good | Very good | Good | Easy |
| D2 | 55-61 | Very good | Fair (semi-stainless) | Good | Moderate |
Terms Worth Knowing
14C28N14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use.
Crossbar Lock
A sliding bar blocks the tang from behind; ambidextrous, self-adjusting for wear and safe to release under load.
G10
Fiberglass laminate: impact, moisture, solvent and temperature resistant, with colour through the layers rather than a surface coating.
Ceramic Ball Bearings
Ceramic races in the pivot instead of washers: smoother action, longer life, less oil.
PVD Coating
Physical Vapor Deposition: a vapor-bonded ceramic-metallic layer far harder and more wear-resistant than paint or plating.
Stonewash Finish
Abrasive tumbling that leaves a mottled grey surface which hides scratches and daily wear.
Carbon Fiber
Woven carbon strands in resin — high stiffness at very low weight, with a visible weave.
Titanium
Aerospace metal for handle scales: strong, light, corrosion-proof and heat-anodizable for colour.
HRC
Rockwell hardness scale C. Most quality blades run 55-62 HRC: harder holds an edge longer, softer tolerates abuse.
Drop Point Blade
The drop point profile used here, chosen for controlled cutting in everyday and outdoor work.
Who Should Buy It
- You want a full-size EDC folder with real 14C28N steel and a bearing-smooth pivot
- You carry left-handed or share knives and want an easy two-way crossbar release
- You want real 14C28N steel and a Crossbar Lock at this price instead of mystery stainless
- You value Blue Gray G10 scales for grip and long-term durability
- You carry a knife every day and want branded fit and finish without premium pricing
Who Should Skip It
- You want premium powder steel; 14C28N is a workhorse, not a status alloy
- You need a sub-3-ounce ultralight city knife — this is a 100 g full-size build
- You want a serrated edge — this is a plain-edge slicer
- You expect a fidget-toy action with zero break-in; give the pivot a week
Care & Maintenance
- Wipe the blade with a dry cloth after every use, especially after cutting fruit, tape or wet material.
- Wash with warm water and a drop of dish soap when needed; never run the pivot under a pressurized stream.
- Dry the knife completely before closing or storing it — trapped moisture is the main corrosion risk.
- Add a small drop of quality oil to the pivot and ceramic bearings every 4-6 weeks of regular use.
- Touch up the edge on a 1000-grit stone, then finish with a few light strokes on a ceramic rod or strop.
- Check the pivot screws periodically and re-tighten them evenly; do not over-torque.
- Store the knife dry and open or loosely closed; avoid leather sheaths for long-term storage.
- Keep Micarta, G10, aluminium and carbon fiber scales clean with soapy water and a soft brush; no solvents needed.
- Inspect the lock engagement before each heavy task — a clean click or snap means the lock is seated.
Compare it directly with other 14C28N steel knives, the Mothus line, more Crossbar Lock knives, and the full knives catalog — or the best sellers list — before you commit.
付款与安全
您的付款信息将得到安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。
Delivery and Shipping
In-stock orders will be shipped in 48 hours except weekend and holidays.
Pre-orders pls subject to the indicated Pre-order shipping dates.
From China warehouse: Estimated delivery in 15–21 business days






