Cpprhd Skull Custom Flashlight Clip For Hanko, CWF, Laulima, Okluma

Handcrafted by Eugene Medvedev of CPPRHD (Copperhead), this skull-shaped custom flashlight clip combines functional design with striking aesthetics. Precision-engineered to fit Hanko, CWF, Laulima, and Okluma flashlights, it transforms your EDC setup into a statement piece. Each clip reflects the same meticulous craftsmanship that defines CPPRHD's renowned lanyard beads—jaw-dropping detail meets everyday utility. Elevate your tactical gear with a clip that's as visually commanding as it is reliable.

CPPRHD Skull Custom Flashlight Clip - Product Overview

Hand-sculpted by Eugene Medvedev, this CPPRHD skull flashlight clip turns a pocket light into a signed piece of carry metalwork. The skull is built up from solid copper - sculpted, not cast - with a crossed-bone brow detail, a lanyard bail and a cross-shaped cutout that indexes the light bezel. It is cut to fit Hanko, CWF, Laulima and Okluma flashlights, and the antiqued finish keeps deepening as you carry it. Each clip reflects the craftsmanship behind CPPRHD's handmade lanyard beads and sits at home in any EDC bead collection - functional hardware that happens to look like custom EDC art.

CPPRHD Skull Custom Flashlight Clip - Hand-Sculpted Copper Construction

Every CPPRHD clip starts as solid copper stock and is built up by hand: the skull is sculpted, not cast, so each surface carries the maker's tool marks. The antiqued finish gives it depth out of the box, and copper keeps living from there - handling deepens the patina month after month, and a polish brings the highlights back whenever you want them. The clip is cut to fit Hanko, CWF, Laulima and Okluma lights, turning a pocket flashlight into a signed piece of carry metalwork. It is as much custom EDC art as it is hardware.

CPPRHD Skull Custom Flashlight Clip - Core Selling Points

• Hand-sculpted copper skull by Eugene Medvedev - sculpted, not cast, so every piece carries tool marks
• Cut to fit Hanko, CWF, Laulima and Okluma flashlight tube diameters
• Cross-shaped cutout and lanyard bail for mounting and charm options
• Antiqued finish with living patina - deepens with carry, polishes back bright on demand
• Spring-tensioned clip geometry keeps the light secure and bezel-down in pocket
• Limited handmade production from CPPRHD's skull series
• Pairs with CPPRHD beads and clips for a matched carry set
• A statement upgrade for any custom flashlight

CPPRHD Skull Custom Flashlight Clip - Where It Earns Its Pocket Time

• Custom flashlight carry - Turns a Hanko, CWF, Laulima or Okluma into a one-of-one piece that people ask about at every meetup.
• EDC flat-lays and photography - The sculpted skull and cross cutout photograph like jewelry - the centerpiece of any staged carry shot.
• Collection display - Paired with CPPRHD beads it forms a signed skull-series set worth its own shelf slot.
• Gift for the collector who has everything - Handmade, signed by reputation and impossible to find in big-box stores.
• Everyday pocket duty - A functional spring clip first - it keeps the light bezel-down and accessible all day.

Frequently Asked Questions

Which flashlights does it fit?

It is precision-cut for Hanko, CWF, Laulima and Okluma flashlights. If your light is from another maker, compare the tube diameter and clip footprint before ordering.

Is the clip really handmade?

Yes - Eugene Medvedev sculpts each skull from copper stock by hand, so every clip carries subtle differences and its own tool marks.

How do I install it?

The clip is spring-tensioned: flex it open slightly, seat it over the light's tail or body the way the stock clip mounted, and let tension hold it. Avoid repeated flexing.

Will the finish change over time?

Yes - the antiqued copper keeps darkening with handling and air exposure. Most owners chase the patina; a quick polish brings the highlights back when you want them.

Can I use it as a regular pocket clip?

That is its job - but treat it as handmade hardware: do not over-flex the arms and check tension periodically so the light never rides loose.

CPPRHD Skull Custom Flashlight Clip - Steel Comparison Table

None

Glossary of Key Terms

CPPRHD (Copperhead)
The working label of Eugene Medvedev, a machinist best known for handmade EDC lanyard beads with skull and nautical themes.

Pocket Clip
A spring-tensioned clip that lets a flashlight ride bezel-down inside a pocket so it stays accessible and does not roll out.

Titanium
A corrosion-proof, non-magnetic metal roughly 45% lighter than steel - the default material for premium carry hardware.

Hanko / CWF / Laulima / Okluma
Four custom and small-batch flashlight makers whose tube diameters this clip is cut to fit.

Deep Carry
A clip geometry that sinks most of the light below the pocket line so only the tailcap or bezel shows.

Lanyard Bead
A small machined metal bead threaded on a lanyard; it is the EDC-accessory category CPPRHD is best known for.

CPPRHD Skull Custom Flashlight Clip - Who Should Buy / Who Should Skip

Who Should Buy

• Hanko, CWF, Laulima or Okluma owners who want their light to stand out
• CPPRHD bead collectors completing a matched skull-series carry set
• EDC photography and flat-lay enthusiasts who stage their gear
• Gift buyers hunting a one-of-a-kind handmade accessory
• Anyone who believes hardware should be signed art

Who Should Skip

• Your flashlight is not from Hanko, CWF, Laulima or Okluma - check tube diameter first
• You want a cheap titanium replacement clip; this is priced as handmade art
• You dislike patina - copper darkens unless you polish it
• You need a high-tension tactical clip for hard use; this is a handmade collector piece
• You want a stocked item - each clip is made in small batches

CPPRHD Skull Custom Flashlight Clip - Care & Maintenance

1. Wipe the clip with a dry microfiber cloth after carry; fingerprints and pocket lint show on precision metal.
2. Rinse with warm water and mild dish soap if it gets grimy, then dry it completely before refitting.
3. Do not over-flex the clip arms - bend it once to fit and leave it there; repeated flexing work-hardens and cracks metal.
4. Check the clip tension periodically; a loose clip is how a flashlight disappears out of a pocket.
5. Avoid bleach, acetone and strong solvents - they strip coatings and can craze finished surfaces unevenly.
6. Deburr any sharp mounting edge with a fine abrasive so it never chews into the flashlight body anodizing.
7. Keep it away from loose steel keys and coins in the same pocket to reduce finish rub.
8. If the fit feels too tight on the light body, warm-water soak and a slow, single adjustment bend is safer than forcing it.
9. Store it flat, not bent, so the spring geometry is not held under load between uses.