QSP Penguin QS130GL-H1 NY 14C28N Blade Resin Handle Glyde Lock Folding Knife

New节省14%
QSP Knife货号: QS130GL-H1 NY

价格:
销售价格$82.00 USD 正常价格$95.00 USD

描述

Meet the QSP Penguin QS130GL-H1, a compact folding knife designed for everyday carry and outdoor tasks. Its 3.06-inch sheepsfoot blade is made from 14C28N stainless steel, valued for corrosion resistance and straightforward sharpening. The steel offers practical, low-maintenance performance, though frequent touch-ups may be needed after abrasive cutting. A glow-in-the-dark resin handle adds distinctive style, while the Glyde lock helps secure the blade during use. Ceramic ball bearings support smooth deployment, and the reversible stainless steel pocket clip allows carry on either side. Measuring 7.06 inches open and 4.00 inches closed, this lightweight knife weighs about 2.96 ounces. With a 3-millimeter blade and 59–61 HRC hardness, the Penguin blends practical dimensions and distinctive materials for daily carry, camping, and general outdoor use.

14C28N Blade Introduction

14C28N is a high-value budget-to-midrange stainless steel that excels in corrosion resistance and ease of sharpening, making it a low-maintenance workhorse for EDC and wet environments, but it falls short of premium steels in edge retention and requires more frequent touch-ups when cutting highly abrasive materials like cardboard.

SPECIFICATIONS

Category :  POCKET KNIFE
Mechanism :  Glyde lock
Name: Penguin Glyde

Blade: 14C28N
Handle: Glow-in-the-dark resin
Lock: Glyde lock

Mechanism: ceramic ball bearing
Overall: 7.06''(180mm)
Closed: 4.00''(102mm)

Blade: 3.06''(78mm)
Blade thickness: +/-3.0mm 
Blade shape: Sheepsfoot

Reversible stainless steel clip
HRC: 59-61 ( blade with coating will be around 1-2HRC less )
Net weight: +/-84g( 2.96oz )

QSP Penguin QS130GL-H1 NY - Product Description

The QSP Penguin QS130GL-H1 NY is a sheepsfoot folding knife from QSP: a 3.06-inch 14C28N blade in satin, a glyde lock and a Glow-in-the-Dark Resin handle at 2.96 ounces, opened by a thumb hole on ceramic bearings. QSP’s Penguin with the Glyde lock and glow-in-the-dark resin scales: a 3.06-inch 14C28N sheepsfoot on ceramic bearings, opened by a thumb hole, with a reversible stainless clip. The printed resin scales recharge their glow from any light source. It sits in 14C28N steel company and belongs in QSP knives — and if you are comparing mechanisms, see the daily carry lineup below; the specs and the honest trade-offs are all here.

The 14C28N Edge

14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.

Belongs in Your Pocket

  • 14C28N blade steel — excellent corrosion resistance and genuinely easy sharpening for a low-maintenance daily edge
  • Glow-in-the-dark printed resin scales — a handle that lights up after dark and never needs batteries
  • 3.06" sheepsfoot, 59-61 HRC 14C28N — a safe straight utility edge with easy upkeep
  • Glyde Lock — QSP’s crossbar-style lock: a sliding bar wedges behind the tang — ambidextrous, self-adjusting and safe to release under load
  • Thumb-hole opening on ceramic ball bearings — a glassy one-hand flick that stays smooth with almost no oil
  • 59-61 HRC heat treat — hard enough to hold a working edge, tough enough not to chip on a dropped cut
  • 3.0 mm blade stock — stiff enough for hard push cuts, thin enough behind the edge to slice
  • QSP Knife build quality — precise CNC fit and finish, ceramic bearings and honest heat treats

Five Ways You Will Actually Use It

  • Around camp after dark: find the knife instantly when the resin glows, and the sheepsfoot edge handles food and cordage without a piercing tip.
  • Everyday pocket duty: at 2.96 oz and 4.00" closed, it disappears in a front pocket; the thumb hole opens it one-handed.
  • Boxes and packaging: the 3.06" sheepsfoot blade goes through tape and corrugated cleanly, and 14C28N touches up in seconds afterwards.
  • Camp and trail: food prep, cordage, kindling and zip ties; wipe the blade dry and it goes straight back in the pocket.
  • Gift for a knife person: real 14C28N steel, a Glyde Lock and Glow-in-the-Dark Resin scales read as a serious tool, not a gas-station special.

Frequently Asked Questions

How does the glow-in-the-dark handle work?

The resin scales are cast with strontium aluminate phosphor and printed with the colour pattern. Expose them to any light for a minute and they glow for hours in the dark — no batteries, and the effect never wears out.

Is 14C28N good steel for a folding knife?

14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.

What is a Glyde lock?

QSP’s take on the crossbar lock: pull the bar back and the blade drops free on its ceramic bearings; release and the bar snaps behind the tang. It works equally well left- or right-handed and keeps your fingers out of the blade path.

Will the Glow-in-the-Dark Resin handle hold up?

QSP’s glow-in-the-dark resin scales are resin-cast with printed colour patterns: stable in moisture, easy to clean, and they recharge their glow from any light source.

Steel Comparison Table

How 14C28N stacks up against steels you will meet at this price:

Steel Typical HRC Edge Retention Corrosion Resistance Toughness Sharpening Ease
14C28N 58-62 Good Excellent Very good Very easy
AUS-8 56-58 Fair Good Very good Very easy
440C 56-59 Good Very good Good Easy
D2 55-61 Very good Fair (semi-stainless) Good Moderate

Terms Worth Knowing

14C28N
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use.

Glyde Lock
QSP’s crossbar-style lock: a sliding bar wedges behind the tang — ambidextrous, self-adjusting and safe to release under load.

Sheepsfoot
A blade with a straight cutting edge and a spine that curves down to a blunt, non-piercing tip — built for safe controlled cuts.

Glow-in-the-Dark Resin
Resin cast with strontium aluminate phosphor: charges from any light source and glows for hours without batteries.

PVD Coating
Physical Vapor Deposition: a vapor-bonded ceramic-metallic layer far harder and more wear-resistant than paint or plating.

Stonewash Finish
Abrasive tumbling that leaves a mottled grey surface which hides scratches and daily wear.

Micarta
Resin-pressed linen, canvas or paper laminate: shock-absorbing, grippy when wet, and it patinas with age.

G10
Fiberglass laminate prized for impact strength, chemical resistance and aggressive texture.

Carbon Fiber
Woven carbon strands in resin — high stiffness at very low weight, with a visible weave.

Titanium
Aerospace metal for handle scales: strong, light, corrosion-proof and heat-anodizable for colour.

Ceramic Ball Bearings
Ceramic races in the pivot instead of washers: smoother action, longer life, less oil.

HRC
Rockwell hardness scale C. Most quality blades run 55-62 HRC: harder holds an edge longer, softer tolerates abuse.

Sheepsfoot Blade
The sheepsfoot profile used here, chosen for controlled cutting in everyday and outdoor work.

Who Should Buy It

  • You want a QSP Penguin with a lock that is genuinely ambidextrous
  • You like distinctive handle materials and a safe sheepsfoot utility edge
  • You want real 14C28N steel and a Glyde Lock at this price instead of mystery stainless
  • You value Glow-in-the-Dark Resin scales for grip and long-term durability
  • You carry a knife every day and want branded fit and finish without premium pricing

Who Should Skip It

  • You need a piercing point — a sheepsfoot has almost none
  • You want premium powder steel; 14C28N is a workhorse alloy
  • You want a serrated edge — this is a plain-edge slicer
  • You expect a fidget-toy action with zero break-in; give the pivot a week

Care & Maintenance

  1. Wipe the blade with a dry cloth after every use, especially after cutting fruit, tape or wet material.
  2. Wash with warm water and a drop of dish soap when needed; never run the pivot under a pressurized stream.
  3. Dry the knife completely before closing or storing it — trapped moisture is the main corrosion risk.
  4. Add a small drop of quality oil to the pivot and ceramic bearings every 4-6 weeks of regular use.
  5. Touch up the edge on a 1000-grit stone, then finish with a few light strokes on a ceramic rod or strop.
  6. Check the pivot screws periodically and re-tighten them evenly; do not over-torque.
  7. Store the knife dry and open or loosely closed; avoid leather sheaths for long-term storage.
  8. Keep Micarta, G10, aluminium and carbon fiber scales clean with soapy water and a soft brush; no solvents needed.
  9. Inspect the lock engagement before each heavy task — a clean click or snap means the lock is seated.

Compare it directly with other 14C28N steel knives, more Glyde Lock knives, and the full knives catalog — or the best sellers list — before you commit.

付款与安全

Apple Pay Google Pay Mastercard Shop Pay Union Pay Visa

您的付款信息将得到安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

Delivery and Shipping

In-stock orders will be shipped in 48 hours except weekend and holidays.

Pre-orders pls subject to the indicated Pre-order shipping dates.

From China warehouse: Estimated delivery in 15–21 business days

你也许也喜欢

最近浏览过的