SnakeSword Capsule Resin Lanyard Beads Blue+Red Knife Lanyard Beads 3 PCS

Elevate your everyday carry with this premium three-piece collection of SnakeSword Capsule Resin Lanyard Beads, featuring bold yellow and white colorways for maximum versatility. These meticulously crafted resin components showcase the distinctive capsule design that seamlessly complements knife lanyards and tactical gear systems. Engineered from premium resin material, they withstand the demands of intensive field use while retaining their polished aesthetic. Designed for serious EDC enthusiasts and collectors, this set delivers professional-grade performance paired with refined visual appeal—an essential enhancement for those who demand both durability and sophistication in their carry configuration.

Diameter: 13mm
Hight: 24mm
Hole Diameter: 6mm
Weight: 2g
Material: Resin

SnakeSword Capsule Resin Lanyard Beads - Blue+Red, 3-Piece Set

A three-piece set of capsule-profile blue cap with red body resin beads for knife lanyards and everyday carry. They drop straight into the lanyard beads rack, the custom knife lanyard bead selection and the wider EDC bead wall here, alongside the rest of the SnakeSword bead range and other resin lanyard beads. If you are rounding out a carry setup, the accessories aisle and EDCMALL EDC catalogue cover the rest.

Why the SnakeSword Capsule Resin Lanyard Beads Blue+Red Belongs in Your Pocket

• Three capsule beads in blue cap with red body - one price, three spares or three gifts
• 13 mm diameter x 24 mm height: sized for grip without pocket bulk
• 6 mm through-bore fits paracord 550, leather thongs and most factory cords
• 2 g per bead - adds weight for retrieval without sinking the carry
• High-gloss polished resin that shrugs off water, sweat and solvents
• Capsule geometry: rounded ends ride smooth, flattened waist indexes under a finger
• Threads onto knife lanyards, zipper pulls, keychains and camera straps
• Consistent moulding - no flash, no rough seams against the cord

Best Uses for the SnakeSword Capsule Resin Lanyard Beads Blue+Red

• Dress up a new folding knife with a colour-matched lanyard pull
• Zipper pulls on packs, range bags and jackets that are hard to find by feel
• Keychains and car keys - faster to grab, easier to spot in a bag
• Camera strap markers and gear-bag identification tags
• Small gifts for the knife people in your life - three beads, three winners

Frequently Asked Questions

Will the 6 mm hole fit paracord 550?
Yes. 550 cord is about 4 mm in diameter, so the 6 mm bore threads it with a snug, centred fit and leaves room for the double-overhand knot that locks the bead.

How heavy are they?
Each bead weighs about 2 g, so the three-piece set adds roughly 6 g to a knife - enough to aid retrieval, not enough to change how the knife carries.

Can I use these on zipper pulls or keychains?
Absolutely. Any cord, thong or string that fits a 6 mm bore works: zipper pulls, keychains, camera straps, tool lanyards and PS5-controller charms.

Do resin beads crack in cold weather?
No - cured resin stays stable well below freezing and, unlike metal beads, it never feels ice-cold against your fingers in winter.

Glossary of Key Terms

Lanyard Bead
A weighted bead fixed to a knife's lanyard cord. It adds grip purchase at the base of the handle, makes retrieving the knife from a pocket easier and gives the knife some personal identity.

Capsule Geometry
The pill-shaped profile of these beads: rounded ends for a smooth pocket ride and a flattened mid-section that indexes under the thumb and forefinger.

Resin Construction
Cured polymer composite that moulds to crisp detail, takes a high polish and shrugs off water, sweat and solvents at a fraction of metal-bead weight.

6 mm Bore
The through-hole diameter. It accepts 550 paracord (about 4 mm), leather thongs and most factory lanyard cords with a snug, centred fit.

Epoxy Paracord Knot
The common snake-knot or lanyard-loop attachment used to fix the bead at the cord's end - hand-tightened so the bead never spins loose.

EDC Accessory
Non-cutting gear that upgrades an existing setup - beads, clips, lanyards and pouches. Cheap to try, easy to swap, and they personalise a knife instantly.

Who Should Buy the SnakeSword Capsule Resin Lanyard Beads Blue+Red

• EDC enthusiasts who colour-match beads to knife handles and clips
• Gift buyers - three beads make three separate small presents
• Anyone whose black knife disappeared in a black pocket one time too many
• Collectors building a bead board; capsule profiles are a distinct shape worth owning

Who Should Skip It

• Buyers wanting metal heft - at 2 g these are featherweights by design
• Anyone needing a bead under 6 mm of cord clearance; check your cord diameter first
• People who boil-wash their gear - remove the beads before machine washing

Care & Maintenance

• Wipe the beads with a damp cloth after handling; resin needs no oil and never rusts.
• Keep them away from prolonged direct sunlight on a dash or windowsill to prevent UV yellowing.
• Do not soak them in acetone, alcohol or strong solvents - they cloud polished resin surfaces.
• Slide them off the lanyard before running the cord through sand or grit so the bore stays smooth.
• Hand-tie new knots; pliers and excessive force can chip the polished capsule edges.
• The 6 mm bore fits paracord 550, leather thong and most factory lanyard cords without adapters.
• Inspect the cord knot monthly; re-tighten before the bead works loose in a pocket or bag.
• Store spare beads in a pouch rather than loose with keys to keep the gloss scratch-free.
• Machine-wash gear with the beads removed - hot water and tumbling dull the finish over time.