SnakeSword Capsule Resin Lanyard Beads Yellow Knife Lanyard Beads 3 PCS

Transform your tactical setup with SnakeSword Capsule Resin Lanyard Beads in striking yellow. Precision-engineered for the discerning EDC enthusiast, these resin beads showcase a refined capsule profile that pairs flawlessly with knife lanyards and professional equipment. Built from resilient resin material, they deliver exceptional durability through rigorous daily use while maintaining their distinctive appearance. Designed for collectors and operators who demand both functional excellence and aesthetic integrity, these beads represent the convergence of meticulous craftsmanship and practical performance in your everyday carry arsenal.

Diameter: 13mm
Hight: 24mm
Hole Diameter: 6mm
Weight: 2g
Material: Resin

SnakeSword Capsule Resin Lanyard Beads Yellow - 3-Piece Set

Three capsule-profile solid gloss yellow resin beads, drilled and finished for knife lanyards. They slot straight into the lanyard beads wall, sit beside the custom knife lanyard bead picks and join the wider EDC bead selection on site. More resin lanyard beads from the same mould family are listed under SnakeSword bead, and the EDC accessories shelf plus the full EDCMALL catalogue cover everything else a carry needs.

Why the SnakeSword Capsule Resin Lanyard Beads Yellow Belongs in Your Pocket

• Three beads per set in solid gloss yellow - spares, swaps or three separate gifts
• 13 mm x 24 mm capsule profile: grip where you need it, bulk where you don't
• 6 mm through-bore swallows paracord 550, leather thong and most factory cords
• 2 g per bead - retrieval weight without changing how the knife carries
• Gloss-polished resin shrugs off rain, sweat and hand sanitizer
• Flattened mid-section indexes under a finger for faster knife retrieval
• Works as zipper pulls, keychain beads and camera-tag markers too
• Clean moulding with no flash or seam ridges to chew through cord sheath

Best Uses for the SnakeSword Capsule Resin Lanyard Beads Yellow

• Adding a colour pop to a black-handled work knife
• Zipper pulls on range bags, packs and jackets you find by feel in the dark
• Keychain and car-key beads so keys stop sinking to the bag floor
• Marking gear-bag zips and camera straps by colour
• Stocking stuffers for the knife people on your list - three beads, three wins

Frequently Asked Questions

Does the 6 mm hole take paracord 550?
Yes. 550 cord runs about 4 mm, so the bore threads it snugly and still leaves room for the double-overhand stopper knot that locks the bead in place.

How much weight does the set add?
About 6 g for all three beads. Enough to swing a lanyard and aid retrieval; not enough to tilt a pocket knife's balance you can feel.

Will the colour wear off?
No - the colour is the resin itself, not a coating. Scratches polish out with a soft cloth and the shade runs through the whole bead.

Are these metal-free safe for winter carry?
They are. Cured resin stays neutral well below freezing, so no cold-sink against fingers the way brass or steel beads deliver in January.

Glossary of Key Terms

Lanyard Bead
A weighted bead fixed to a knife's lanyard cord. It adds grip purchase at the base of the handle, makes retrieving the knife from a pocket easier and gives the knife some personal identity.

Capsule Geometry
The pill-shaped profile of these beads: rounded ends for a smooth pocket ride and a flattened mid-section that indexes under the thumb and forefinger.

Resin Construction
Cured polymer composite that moulds to crisp detail, takes a high polish and shrugs off water, sweat and solvents at a fraction of metal-bead weight.

6 mm Bore
The through-hole diameter. It accepts 550 paracord (about 4 mm), leather thongs and most factory lanyard cords with a snug, centred fit.

Epoxy Paracord Knot
The common snake-knot or lanyard-loop attachment used to fix the bead at the cord's end - hand-tightened so the bead never spins loose.

EDC Accessory
Non-cutting gear that upgrades an existing setup - beads, clips, lanyards and pouches. Cheap to try, easy to swap, and they personalise a knife instantly.

Who Should Buy the SnakeSword Capsule Resin Lanyard Beads Yellow

• EDC fans who match bead colour to knife scales, clips and stitch lines
• Gift buyers who want one small present to split three ways
• Anyone who keeps losing a black knife inside a black pocket
• Bead-board collectors; the capsule shape is a distinct profile worth a slot

Who Should Skip It

• Buyers chasing metal heft - 2 g per bead is a featherweight on purpose
• Cord thicker than about 5 mm; measure your lanyard before ordering
• Anyone machine-washing gear with beads attached - take them off first

Care & Maintenance

• Wipe the beads with a damp cloth after handling; resin needs no oil and never rusts.
• Keep them away from prolonged direct sunlight on a dash or windowsill to prevent UV yellowing.
• Do not soak them in acetone, alcohol or strong solvents - they cloud polished resin surfaces.
• Slide them off the lanyard before running the cord through sand or grit so the bore stays smooth.
• Hand-tie new knots; pliers and excessive force can chip the polished capsule edges.
• The 6 mm bore fits paracord 550, leather thong and most factory lanyard cords without adapters.
• Inspect the cord knot monthly; re-tighten before the bead works loose in a pocket or bag.
• Store spare beads in a pouch rather than loose with keys to keep the gloss scratch-free.
• Machine-wash gear with the beads removed - hot water and tumbling dull the finish over time.