SnakeSword Resin Lanyard Beads Transparent Black Resin Skull Knife EDC Pendant 3 PCS

Designed for serious practitioners, this three-piece resin bead ensemble showcases expertly rendered skull knife motifs in transparent black. Manufactured from high-performance resin, these beads combine exceptional tensile strength with negligible weight, positioning them as superior choices for knife lanyards, paracord systems, and equipment personalization. Each bead reflects superior craftsmanship with authoritative visual presence, targeting professionals and collectors who require unrelenting durability alongside distinctive style. The impact-resistant yet featherweight composition delivers dependable functionality across demanding operational scenarios while maintaining refined aesthetic integrity and tactical sophistication.

Diameter: 17mm
Hole Diameter: 6mm
Weight: 1.5g-2g
Material: Resin

SnakeSword Skull Resin Lanyard Beads Transparent Black - 3-Piece Set

A three-piece set of 17 mm resin beads carved with a raised skull-and-knife relief in translucent smoky black, drilled through with a 6 mm lanyard bore. They slot straight into the lanyard beads wall and the custom knife lanyard bead picks, and sit alongside the rest of the resin lanyard beads and EDC bead selection on site. The full SnakeSword bead range is one click away, and the EDC accessories shelf plus the EDCMALL catalogue round out a carry.

Why the SnakeSword Skull Resin Lanyard Beads Transparent Black Belongs in Your Pocket

• Three carved skull beads per set in translucent smoky black
• Raised skull-and-knife relief - sculpted detail, not a surface print
• 17 mm diameter drum profile: display presence without pocket bulk
• 6 mm through-bore fits paracord 550, leather thong and most factory cords
• 1.5-2 g per bead - lanyard weight that never drags the carry down
• High-gloss or frosted polish that resists water, sweat and solvents
• Works as zipper pulls, keychain beads and gear-bag markers too
• Clean moulding - no flash or seam ridges against the cord

Best Uses for the SnakeSword Skull Resin Lanyard Beads Transparent Black

• Giving a black tactical folder a skull accent that actually reads
• Zipper pulls on range bags, packs and jackets you find by feel at night
• Keychain and key-ring beads so keys stop sinking in the bag
• Colour-coding gear bags, camera straps and tool rolls
• Small gifts for knife people - three beads, three separate wins

Frequently Asked Questions

Will the skull detail wear off?
No. The skull is carved in raised relief into the resin itself - there is no printing or coating to rub away. Scratches on the polish buff back with a soft cloth.

Does the 6 mm hole fit paracord 550?
Yes. 550 cord is about 4 mm, so the bore threads it with a snug, centred fit and still leaves room for the double-overhand stopper knot.

How much do they weigh?
Each bead runs 1.5-2 g, so the set adds roughly 5-6 g to a knife - enough to swing the lanyard and speed up retrieval, not enough to change the carry.

Do any of these glow in the dark?
This colourway is standard non-glow resin. The glow-in-the-dark version of the same skull mould is a separate listing - check the Luminous White variant.

Glossary of Key Terms

Lanyard Bead
A weighted bead fixed to a knife's lanyard cord. It adds grip purchase at the base of the handle, makes retrieving the knife from a pocket easier and gives the knife some personal identity.

Skull Relief Carving
A three-dimensional skull sculpted in positive relief on the bead face - not a laser etching. The raised detail reads clearly at arm's length and keeps its edges for years of carry.

Cylindrical Drum Profile
A short cylinder with a flat carved face and a rounded back, so the bead rolls smoothly through a palm while the carved face stays forward for display.

Resin Construction
Cured polymer composite that moulds to crisp detail, takes a high polish and shrugs off water, sweat and solvents at a fraction of metal-bead weight.

6 mm Bore
The through-hole diameter. It accepts 550 paracord (about 4 mm), leather thongs and most factory lanyard cords with a snug, centred fit.

Glow-in-the-Dark Resin
Resin dosed with strontium-aluminate phosphor: charge it under daylight or a lamp and it emits a green-blue glow in darkness. Standard resin beads do not glow.

Translucent Resin
Resin that passes light instead of blocking it - held against a window or flashlight the whole bead lights up, which opaque beads cannot do.

EDC Accessory
Non-cutting gear that upgrades an existing setup - beads, clips, lanyards and pouches. Cheap to try, easy to swap, and they personalise a knife instantly.

Who Should Buy the SnakeSword Skull Resin Lanyard Beads Transparent Black

• EDC enthusiasts who match bead colour to knife scales and clips
• Skull-and-pirate motif collectors building out a bead board
• Buyers who want the skull look in clean, wear-anywhere neutrals
• Gift buyers - three beads make three separate small presents

Who Should Skip It

• Buyers chasing metal heft - resin at 1.5-2 g is a featherweight by design
• Cord thicker than about 5 mm; measure your lanyard before ordering
• Anyone expecting a glow - this colourway is standard non-glow resin

Care & Maintenance

• Wipe the beads with a damp cloth after handling; resin needs no oil and never rusts.
• Keep them away from prolonged direct sunlight on a dash or windowsill to prevent UV yellowing.
• Do not soak them in acetone, alcohol or strong solvents - they cloud polished resin surfaces.
• Slide them off the lanyard before running the cord through sand or grit so the bore stays smooth.
• Hand-tie new knots; pliers and excessive force can chip the polished capsule edges.
• The 6 mm bore fits paracord 550, leather thong and most factory lanyard cords without adapters.
• Inspect the cord knot monthly; re-tighten before the bead works loose in a pocket or bag.
• Store spare beads in a pouch rather than loose with keys to keep the gloss scratch-free.
• Machine-wash gear with the beads removed - hot water and tumbling dull the finish over time.