Trivisa Intruder-03O 14C28N Blade Titanium and G10 Handle Axis Lock Folding Knife

New
Trivisa Knives货号: Intruder-03O

价格:
销售价格$82.66 USD

描述

Designed by TASKnives, the Trivisa Intruder-03O combines a tanto-point blade with a titanium and G10 handle for a practical EDC design. Its black stonewashed 14C28N stainless steel offers corrosion resistance and is easy to sharpen, making upkeep straightforward. With a hardness of 58–60 HRC, the blade measures 4.29 inches long and 0.17 inches thick. An axis lock secures the blade during use, while a washer pivot supports its tactical design. The knife measures 9.69 inches overall and 5.39 inches when closed, with a 1.41-inch blade width. Weighing 7.49 ounces, it is suited to hiking, camping, fishing, hunting, and everyday carry. Its stainless construction may require more frequent edge touch-ups when cutting abrasive materials such as cardboard.

14C28N Blade Introduction

14C28N is a high-value budget-to-midrange stainless steel that excels in corrosion resistance and ease of sharpening, making it a low-maintenance workhorse for EDC and wet environments, but it falls short of premium steels in edge retention and requires more frequent touch-ups when cutting highly abrasive materials like cardboard.

SPECIFICATIONS

Designer:TASKnives
Style:Tanto Point
Blade Material:14C28N steel
Blade Finished:Black Stonewashed
Handle Material:Titanium G10
Lock Style:Axis lock
Hardness:58-60HRC
Pivot:Washer for tactical purpose

Size:
Overall length-9.69"(246mm)
Blade length-4.29" (109mm)
Closed length-5.39"(137.13mm)
Blade width-1.41''(36mm)
Blade thickness-0.17''(4.4mm)
Net Weight:7.49oz(212.5g)

Usage:Outdoor survival,EDC,hunting,fishing, hiking and camping

Trivisa Intruder-03O - Product Description

The Trivisa Intruder-03O is a tanto point folding knife from TRIVISA: a 4.29-inch 14C28N blade in black stonewashed, an axis lock and a Titanium + G10 handle at 7.49 ounces. A 9.69-inch tactical folder with a 4.29-inch tanto blade in 4.4 mm stock — the biggest knife Trivisa ships. TASKnives designed it around a washer pivot instead of ball bearings, because a tactical pivot tolerates mud, grit and impact that would gum up bearing races. It sits in 14C28N steel company and belongs in Trivisa knives — and if you are comparing mechanisms, see the daily carry lineup below; the specs and the honest trade-offs are all here.

The 14C28N Edge

14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.

Belongs in Your Work Kit

  • 14C28N blade steel — excellent corrosion resistance and genuinely easy sharpening for a low-maintenance daily edge
  • 4.29-inch tanto blade in 4.4 mm stock — a reinforced angular tip for puncture work and a straight edge that keeps its line
  • 9.69" overall, 7.3-7.5 oz — full-size tactical reach; belt-clip territory, not skinny-jeans carry
  • Axis Lock — ambidextrous release, no fingers in the blade path, and a bar that self-adjusts as it wears
  • Washer pivot, tactical grade — tolerates grit, mud and impact that would slow bearing races
  • 58-60 HRC heat treat — hard enough to hold a working edge, tough enough not to chip on a dropped cut
  • 4.4 mm blade stock — stiff enough for hard push cuts, thin enough behind the edge to slice
  • TRIVISA in-house design — branded fit and finish at a price the big brands reserve for catalog work

Five Ways You Will Actually Use It

  • Duty and range work: the tanto tip punches through cordura, hose and strap, and the axis-style crossbar lock releases safely with gloves on.
  • Everyday pocket duty: at 7.49 oz and 5.39" closed, it rides a full-size pocket or belt clip without apology.
  • Boxes and packaging: the 4.29" tanto point blade goes through tape and corrugated cleanly, and 14C28N touches up in seconds afterwards.
  • Camp and trail: food prep, cordage, kindling and zip ties; wipe the blade dry and it goes straight back in the pocket.
  • Gift for a knife person: real 14C28N steel, a Axis Lock and Titanium + G10 scales read as a serious tool, not a gas-station special.

Frequently Asked Questions

Why a washer pivot instead of ball bearings?

Washers are thicker and less sensitive to grit: for a knife this size used outdoors, washer pivots keep working when mud and sand would slow a bearing race. The trade is a slightly heavier action.

Is 14C28N good steel for a folding knife?

14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.

How does the axis-style crossbar lock work?

Pull the crossbar back with thumb and index finger and the blade drops free; release it and the bar snaps behind the tang. Your fingers never cross the closing path, and it works equally well left- or right-handed.

Will the Titanium + G10 handle hold up?

Titanium scales are corrosion-proof and dent-resistant; the finish may show carry marks, which is patina, not failure.

Steel Comparison Table

How 14C28N stacks up against steels you will meet at this price:

Steel Typical HRC Edge Retention Corrosion Resistance Toughness Sharpening Ease
14C28N 58-62 Good Excellent Very good Very easy
AUS-8 56-58 Fair Good Very good Very easy
440C 56-59 Good Very good Good Easy
D2 55-61 Very good Fair (semi-stainless) Good Moderate

Terms Worth Knowing

14C28N
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use.

Tanto Point
An angular tip formed by two straight edge segments; it concentrates strength at the point for puncturing and prying-resistant work.

Washer Pivot
Phosphor-bronze or PTFE washers instead of ball bearings: more tolerant of grit and impact, slightly less glassy in the flick.

Axis-Style Crossbar Lock
A sliding bar through the handle blocks the blade tang; ambidextrous, safe to release under load, and self-adjusting for wear.

PVD Coating
Physical Vapor Deposition: a vapor-bonded ceramic-metallic layer far harder and more wear-resistant than paint or plating.

Stonewash Finish
Abrasive tumbling that leaves a mottled grey surface which hides scratches and daily wear.

Micarta
Resin-pressed linen, canvas or paper laminate: shock-absorbing, grippy when wet, and it patinas with age.

G10
Fiberglass laminate prized for impact strength, chemical resistance and aggressive texture.

Carbon Fiber
Woven carbon strands in resin — high stiffness at very low weight, with a visible weave.

Titanium
Aerospace metal for handle scales: strong, light, corrosion-proof and heat-anodizable for colour.

Resin-Stabilized Wood
Wood infused with resin under pressure: keeps a natural look while resisting moisture, cracking and swelling.

Damascus G10
G10 laminate etched or molded with a Damascus-style pattern — the look of layered steel with none of its rust care.

Ceramic Ball Bearings
Ceramic races in the pivot instead of washers: smoother action, longer life, less oil.

HRC
Rockwell hardness scale C. Most quality blades run 55-62 HRC: harder holds an edge longer, softer tolerates abuse.

Tanto Point Blade
The tanto point profile used here, chosen for controlled cutting in everyday and outdoor work.

Who Should Buy It

  • You want a large tanto folder with real mass behind every cut
  • You need an axis-style crossbar lock you can operate with gloves on
  • You want real 14C28N steel and a Axis Lock at this price instead of mystery stainless
  • You value Titanium + G10 scales for grip and long-term durability
  • You carry a knife every day and want branded fit and finish without premium pricing

Who Should Skip It

  • You want a lightweight pocket knife — 7.3 ounces plus a 5.39-inch closed length is serious bulk
  • You cut mostly food and fruit; a tanto point is built for puncture, not slicing
  • You want a serrated edge — this is a plain-edge slicer
  • You expect a fidget-toy action with zero break-in; give the pivot a week

Care & Maintenance

  1. Wipe the blade with a dry cloth after every use, especially after cutting fruit, tape or wet material.
  2. Wash with warm water and a drop of dish soap when needed; never run the pivot under a pressurized stream.
  3. Dry the knife completely before closing or storing it — trapped moisture is the main corrosion risk.
  4. Add a small drop of quality oil to the pivot and ceramic bearings every 4-6 weeks of regular use.
  5. Touch up the edge on a 1000-grit stone, then finish with a few light strokes on a ceramic rod or strop.
  6. Check the pivot screws periodically and re-tighten them evenly; do not over-torque.
  7. Store the knife dry and open or loosely closed; avoid leather sheaths for long-term storage.
  8. Keep Micarta, G10 and carbon fiber scales clean with soapy water and a soft brush; no solvents needed.
  9. Inspect the lock engagement before each heavy task — a clean click or snap means the lock is seated.

Compare it directly with other 14C28N steel knives, more Axis Lock knives, and the full knives catalog — or the best sellers list — before you commit.

付款与安全

Apple Pay Google Pay Mastercard Shop Pay Union Pay Visa

您的付款信息将得到安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

Delivery and Shipping

In-stock orders will be shipped in 48 hours except weekend and holidays.

Pre-orders pls subject to the indicated Pre-order shipping dates.

From China warehouse: Estimated delivery in 15–21 business days

你也许也喜欢

最近浏览过的