Trivisa Volans-03RB 154CM Blade Layers G10 Handle Liner Lock Folding Knife

New
Trivisa Knives

价格:
销售价格$84.99 USD

描述

Designed by Steve Cheng, the Trivisa Volans-03RB combines a 154CM stainless steel blade with striking red-and-black G10 scales for a dependable everyday carry folder. The 3.26-inch blade features a stonewashed and satin finish, while a ceramic ball bearing supports smooth deployment using the thumb stud. A liner lock helps secure the blade during use. Measuring 7.99 inches open and 4.72 inches closed, it balances practical reach with a compact carry profile. At 3.75 ounces, it is suited to daily tasks and outdoor activities such as hiking, camping, fishing, and hunting. The blade has a stated hardness of 58–60 HRC, offering a capable blend of edge retention, wear resistance, and corrosion resistance. A versatile folding knife for users seeking robust materials and distinctive styling.

154CM Blade Introduction

154CM is a high-carbon stainless steel that offers an exceptional balance of wear resistance, toughness, and corrosion resistance. Originally developed for industrial turbine applications, it provides excellent edge retention and a high degree of hardness, typically reaching 57-61 HRC. While it excels in versatile daily use, its primary drawback lies in its moderate difficulty to sharpen compared to lower-grade steels and its slightly lower corrosion resistance when contrasted with modern nitrogen-based alloys or CPM-S30V. Nevertheless, it remains a premium standard for heavy-duty folders.

SPECIFICATIONS

Designer:Steve Cheng
Style:Thumb Stud 
Blade Material:154CM steel
Blade Finished:Stone wash & satin
Handle Material:Red and black G10
Lock Style:Liner lock
Hardness:58-60HRC
Bearing:Ceramic ball bearing

Size:
Overall length-7.99"(203mm)
Blade length-3.26"(83mm)
Closed length-4.72"(120mm)
Blade thickness-0.13"(3.5mm)
Net Weight:3.75oz(106.4g)

Usage:Outdoor survival,EDC,hunting,fishing, hiking and camping

Trivisa Volans-03RB - Product Description

The Trivisa Volans-03RB is a drop point folding knife from Trivisa: a 3.26-inch 154CM blade in stonewash and satin, a liner lock and a Red Black Layered G10 handle at 3.75 ounces. A Steve Cheng design in 154CM — the turbine-bearing steel that holds a hard edge and tolerates lateral stress better than brittle super steels. Red-and-black layered G10 gives it the loudest handle in the catalog, and a thumb stud on ceramic bearings makes one-hand opening clean and repeatable. It sits in 154CM steel company and belongs in Trivisa knives — and if you are comparing mechanisms, see the daily carry lineup below; the specs and the honest trade-offs are all here.

The 154CM Edge

154CM is a high-carbon stainless originally developed for jet-engine turbine bearings. It holds a working edge well, takes a high hardness (58-61 HRC), and shrugs off the sideways stress that chips more brittle super steels. Corrosion resistance is good rather than class-leading, and its wear resistance means sharpening takes a little more patience than a 14C28N blade.

Belongs in Your Pocket

  • 154CM blade steel — proven turbine-bearing steel with strong edge retention and better toughness than brittle super alloys
  • 154CM stainless, 58-60 HRC — the classic hard-wearing turbine steel with better toughness than most powder alloys
  • Red-and-black layered G10 — colour molded through the laminate, so it never chips or flakes off
  • Liner Lock — the simplest lock to understand, the easiest to flush clean, and one-hand closable
  • Ceramic ball bearings in the pivot: a glassy one-hand flick that stays smooth with almost no oil
  • 58-60 HRC heat treat — hard enough to hold a working edge, tough enough not to chip on a dropped cut
  • 3.5 mm blade stock — stiff enough for hard push cuts, thin enough behind the edge to slice
  • TRIVISA in-house design — branded fit and finish at a price the big brands reserve for catalog work

Five Ways You Will Actually Use It

  • Daily carry with character: the stonewash-and-satin blade hides wear while the layered G10 scales make the knife easy to spot in a bag or drawer.
  • Everyday pocket duty: at 3.75 oz and 4.72" closed, it disappears in a front pocket; the release works one-handed.
  • Boxes and packaging: the 3.26" drop point blade goes through tape and corrugated cleanly, and 154CM touches up in seconds afterwards.
  • Camp and trail: food prep, cordage, kindling and zip ties; wipe the blade dry and it goes straight back in the pocket.
  • Gift for a knife person: real 154CM steel, a Liner Lock and Red Black Layered G10 scales read as a serious tool, not a gas-station special.

Frequently Asked Questions

Is 154CM hard to sharpen?

More so than 14C28N, because its wear resistance is higher — use a ceramic or diamond stone rather than a soft waterstone. The payoff is an edge that lasts noticeably longer between touch-ups.

Is 154CM good steel for a folding knife?

154CM is a high-carbon stainless originally developed for jet-engine turbine bearings. It holds a working edge well, takes a high hardness (58-61 HRC), and shrugs off the sideways stress that chips more brittle super steels. Corrosion resistance is good rather than class-leading, and its wear resistance means sharpening takes a little more patience than a 14C28N blade.

How does the liner lock work?

The liner springs behind the blade tang as the blade opens and blocks it from closing. Push the liner aside with your thumb to close — one hand, one motion, edge away from your fingers.

Will the Red Black Layered G10 handle hold up?

G10 is fiberglass laminate: it resists impact, moisture, solvents and temperature swings without swelling.

Steel Comparison Table

How 154CM stacks up against steels you will meet at this price:

Steel Typical HRC Edge Retention Corrosion Resistance Toughness Sharpening Ease
154CM 58-61 Very good Good Good Moderate
CPM S30V 58-61 Very good Very good Good Moderate
D2 55-61 Very good Fair (semi-stainless) Good Moderate
14C28N 58-62 Good Excellent Very good Very easy

Terms Worth Knowing

154CM
154CM is a high-carbon stainless originally developed for jet-engine turbine bearings.

Layered G10
Fiberglass laminate built from coloured layers so the pattern runs through the material rather than sitting on the surface.

Thumb Stud
A small protrusion on the blade spine that catches the thumb for one-hand opening; simpler and slimmer than a flipper tab.

PVD Coating
Physical Vapor Deposition: a vapor-bonded ceramic-metallic layer far harder and more wear-resistant than paint or plating.

Stonewash Finish
Abrasive tumbling that leaves a mottled grey surface which hides scratches and daily wear.

Micarta
Resin-pressed linen, canvas or paper laminate: shock-absorbing, grippy when wet, and it patinas with age.

G10
Fiberglass laminate prized for impact strength, chemical resistance and aggressive texture.

Carbon Fiber
Woven carbon strands in resin — high stiffness at very low weight, with a visible weave.

Titanium
Aerospace metal for handle scales: strong, light, corrosion-proof and heat-anodizable for colour.

Anodised Aluminium
Aluminium with an electrochemically grown oxide layer that is hard, corrosion-proof and colour-fast.

Ultem PEI
A high-strength amber thermoplastic: chemically inert, moisture-proof and much lighter than metal.

Copper
Solid copper scales add weight and develop a one-of-a-kind dark patina with handling.

Ceramic Ball Bearings
Ceramic races in the pivot instead of washers: smoother action, longer life, less oil.

HRC
Rockwell hardness scale C. Most quality blades run 55-62 HRC: harder holds an edge longer, softer tolerates abuse.

Drop Point Blade
The drop point profile used here, chosen for controlled cutting in everyday and outdoor work.

Who Should Buy It

  • You want a proven high-carbon stainless that holds an edge under real work
  • You like a thumb-stud opener and a handle that stands out
  • You want real 154CM steel and a Liner Lock at this price instead of mystery stainless
  • You value Red Black Layered G10 scales for grip and long-term durability
  • You carry a knife every day and want branded fit and finish without premium pricing

Who Should Skip It

  • You want zero-fuss sharpening — 154CM needs decent abrasives
  • You prefer a subdued all-black tool; the layered red G10 is deliberately loud
  • You want a serrated edge — this is a plain-edge slicer
  • You expect a fidget-toy action with zero break-in; give the pivot a week

Care & Maintenance

  1. Wipe the blade dry after every use; 154CM is stainless but not stain-proof, and sweat will mark it.
  2. Wash with warm soapy water and dry fully before closing; never soak the pivot.
  3. A light coat of oil before long storage prevents the faint surface rust high-carbon stainless can form.
  4. Sharpen on a quality ceramic or diamond stone — 154CM’s wear resistance dulls soft waterstones fast.
  5. Finish with light strop strokes; a small micro-bevel helps the edge resist rolling.
  6. Do not pry or twist laterally; even tough stainless can chip a thin edge under sideways load.
  7. Oil the pivot and ceramic bearings every 4-6 weeks and keep lint out of the liner track.
  8. Wipe layered G10 scales with a damp cloth; the colour comes from the laminate, not a coating.
  9. Store dry and check pivot screws every month; inspect liner-lock engagement before hard cuts.

Compare it directly with other 154CM steel knives, more Liner Lock knives, and the full knives catalog — or the best sellers list — before you commit.

付款与安全

Apple Pay Google Pay Mastercard Shop Pay Union Pay Visa

您的付款信息将得到安全处理。我们不存储信用卡详细信息,也无法访问您的信用卡信息。

Delivery and Shipping

In-stock orders will be shipped in 48 hours except weekend and holidays.

Pre-orders pls subject to the indicated Pre-order shipping dates.

From China warehouse: Estimated delivery in 15–21 business days

你也许也喜欢

最近浏览过的