Overview & First Impressions
A whip that cracks properly is a hundred strands behaving identically, and every one of them starts life as a cut. Plaiters slice paracord into tapered strands, bevel leather lace to a feather edge at the fall, and trim bellies so the taper flows without a ridge. The cuts have to be clean, because a fuzzy strand holds wax unevenly and the whip develops a flat spot in the crack. Whipmakers therefore treat their bench blade like a second pair of hands.
Materials & Construction
Nylon paracord is abrasive in a slow, sneaky way: the fibres polish an edge round over dozens of cuts rather than dulling it at once. 14C28N answers that specific problem, its fine microstructure taking a keen apex that survives hundreds of strand cuts before a strop brings it back. Leather bevels add a second demand, a low angle that slices rather than pushes. Tenable knives grind the Entity thin enough for leather work while keeping the 14C28N edge stable.
Design & Details
The Entity B1036H2 pairs a top liner lock with a G10 handle that grips waxed fingers. The spine-side lock matters at a plaiting bench, because the knife rests on its side between cuts and the flat presentation face stays clean. The G10 texture bites through the paraffin and beeswax that coats every whipmaker's hands, and the blade's drop point tip starts a strand cut in the middle of a cord without snagging.
Real-World Use
Four cuts dominate the craft. Tapering strands needs controlled, angled passes where the edge does the work. Bevelling leather lace for the fall needs long slicing strokes with a fresh edge. Cutting bellies free from the cordell needs a tip that reaches under tension. Trimming finished strand ends flush needs precision without fraying. One knife doing all four without rolling saves more time than any jig, because setup cost dominates small-batch whip work.
Ownership Notes
Plaiters talk about their rotation of folding knives the way cooks talk about knives, and the advice converges: dedicate one, keep it scary sharp, retire it from cardboard duty forever. Serious collectors of EDC knives already know the Entity family by its lock placement and value pricing; the B1036H2 at EdcMall extends it with a G10 handle that laughs at wax buildup.
Who Is This For?
Buy it if you plait nylon or leather and want a strand knife that holds a keen apex through a full session of waxed cord. It suits whipmakers, braiders, and anyone cutting fibrous synthetic material where edge rolling ruins the work. Skip it if you only cut rope occasionally, since any sharp blade will do, and spend the difference on a good hook instead. For working plaiters, this is a tool, not a toy.
Final Verdict
Whipmaking rewards edge quality over everything, and the Entity B1036H2 delivers it: 14C28N ground thin, a top liner lock that stays out of the wax, and G10 that grips through it. The blade takes and holds the polished bevel strand cutting demands, and the price leaves room in the budget for a strop. Dedicate it to the bench, wipe the wax off after each session, and it will outlast the whips it helps build.
