Nitecore EDC15 1200 Lumen Rechargeable Flat EDC Flashlight with UV Light

The Nitecore EDC15 is an ultra-slim everyday carry flashlight that delivers powerful white light up to 1,200 lumens with a 227-yard throw, plus versatile UV illumination reaching 1,350mW. Four white-light brightness levels and three adjustable UV modes adapt to any task—from inspections and leak detection to fluorescence verification. Measuring just 0.63 inches thick and weighing 3 ounces, it fits effortlessly in your pocket. Intuitive slide switch and M button controls make switching between light sources seamless. The 1,050mAh rechargeable battery provides up to 200 hours of runtime on Ultralow, charging via USB-C. Built tough with a PVD-coated stainless-steel shell, IPX7 water resistance, and 2-meter impact resistance, the EDC15 handles daily carry, work, travel, and outdoor adventures with reliability and style.

Specifications

Nitecore EDC15 - 1200-Lumen Flat EDC Flashlight with a 1350 mW UV Emitter

The Nitecore EDC15 packs two light sources into a slab of PVD-coated stainless steel barely 16 mm thick: a 1,200-lumen white beam that reaches 227 yards, and a 1,350 mW ultraviolet emitter for checking currency, finding leaks and reading fluorescence.

The UHi 25 LED runs four white levels from a 1-lumen moonlight mode up to Turbo, plus three UV power levels from 220 to 1,350 mW. A slide switch picks the light source, the M button steps through brightness, and the built-in 1,050 mAh cell refills over USB-C. At 3 ounces it disappears in a pocket - until you need it.

See the whole Nitecore flashlight range and the Nitecore EDC series, compare against other flashlights and tactical EDC lights, or start from the full EDC lineup and best sellers.

LED, Output and Runtime - What the EDC15 Delivers

Two emitters, one slim stainless body. White and UV outputs, ANSI-tested:

• White: Turbo 1,200 lm / 30 min | High 400 lm / 1 h | Low 50 lm / 11 h
• White Ultralow: 1 lm / 260 h - a genuine moonlight mode
• Peak beam distance 227 yards (207 m) at 10,886 candela
• UV: 3 levels - 220 mW / 650 mW / 1,350 mW
• UHi 25 LED behind a focused optic in a flat stainless body
• Built-in 1,050 mAh Li-ion battery, USB Type-C recharging
• IPX7 waterproof with 2 m impact resistance
• 4.37 in long, 0.63 in thin, 3 oz - a true flat EDC profile

White Light Plus UV - What the Second Emitter Is For

The 1,350 mW UV emitter is not a gimmick - it is the feature that makes the EDC15 the only light many people carry. Practical uses: verifying currency and ID documents, spotting coolant, AC dye and other fluid leaks, finding pet stains in carpet, checking scorpions and caterpillars after dark, inspecting antique glass and minerals, and curing or checking UV-reactive resins and adhesives. Three power levels let you match the output to the job instead of washing out the fluorescence.

Nitecore EDC15 1200 Lumen - Core Selling Points

• 1,200-lumen Turbo with a 227-yard throw from a light 0.63 in thick
• Built-in 1,350 mW UV emitter with three power levels
• 1-lumen moonlight mode with 260 hours of runtime
• Slide switch selects white or UV; M button steps brightness
• PVD-coated stainless steel shell - scratch-resistant and pocket-friendly
• IPX7 waterproof with 2 m impact resistance
• USB Type-C recharging of the built-in 1,050 mAh cell
• Only 3 oz - a genuine flat-carry EDC profile

Where It Performs

• Everyday carry: the flat slab rides invisibly in a front pocket, with enough throw for a parking lot sweep.
• Document and currency checks: UV level 2 or 3 in a retail or venue setting.
• Maintenance and leak-finding: UV picks out coolant and AC dye trails no white light will show you.
• Outdoor and herping: scorpion hunts, mineral shows and campsite checks after dark.
• Night walks: 1-lumen moonlight for paths, Turbo for the dark shortcut home.

Frequently Asked Questions

How bright is the UV output?
Three levels: 220 mW, 650 mW and 1,350 mW. Use the lowest level that works - lower UV levels reveal fluorescence with better contrast.

What can the UV light actually be used for?
Currency and document verification, fluid leak detection with UV dye, pet-stain location, scorpion hunting, mineral and antique inspection, and UV-cured resin work.

How thin is it, really?
0.63 in (16 mm) thick, 1.1 in wide and 4.37 in long, at 3 oz. It sits flat in a pocket the way a knife does, not the way a tube light does.

Is it waterproof?
IPX7 - it survives immersion in 1 metre of water for 30 minutes, plus 2-metre impact resistance.

What is the runtime?
Up to 260 hours on the 1-lumen Ultralow mode; Turbo runs 30 minutes. The built-in 1,050 mAh cell recharges over USB-C.

Glossary of Terms

UHi 25 LED
Nitecore's high-intensity LED platform, chosen here for a tight, long-throw beam from a flat body.

UV Radiant Flux (mW)
UV output measured in milliwatts of radiant power - unlike lumens, which measure visible light. 1,350 mW is a serious, tool-grade UV output.

PVD Coating
Physical vapour deposition - a hard, thin surface coating far more scratch-resistant than paint or standard anodizing.

IPX7
Protected against immersion in 1 metre of water for 30 minutes.

Beam Intensity (Candela)
The intensity of the brightest point of the beam; higher candela means a longer-throwing, tighter beam. The EDC15 peaks at 10,886 cd.

Moonlight Mode
A 1-lumen output level for reading maps or moving at night without destroying dark adaptation.

Who Should Buy the Nitecore EDC15 - and Who Should Skip It

Who should buy it

• Flat-EDC carriers who want big light without a tube in the pocket
• Tradespeople and DIYers who need UV for leaks, dyes and inspections
• Retail, venue and collecting users who verify documents and antiques
• Anyone who wants one light that does white, moonlight and UV properly

Who should skip it

• Users who want a replaceable battery - the 1,050 mAh cell is built in
• Anyone needing submersion-proof carry; IPX7 handles immersion, but there is no dust-only IP6X first digit rating
• Buyers who want a tail switch for momentary tactical use - the EDC15 uses a slide switch and M button
• Ultralight purists who resent 3 oz in the pocket

Care & Maintenance

1. Recharge the built-in cell every three months when stored.
2. Charge over USB-C with a standard adapter; avoid fast-charge bricks that exceed spec for long sessions.
3. Keep the charging port clean and dry before plugging in.
4. Wipe the PVD stainless body with a soft cloth; the coating resists scratches but abrasives will dull it.
5. Do not stare into the UV emitter, and never aim it at eyes or skin for extended periods.
6. Keep the lens clean; UV output drops fast through a dirty window.
7. Dry the light after rain before storage, despite the IPX7 rating.
8. Avoid leaving it in a hot car - heat ages the built-in lithium cell.
9. Store in a cool dry place, half to fully charged.