Descripción
Designed by the TRIVISA Team, the Butterfly-GM JM06-GM-14 folding knife pairs a compact profile with a practical blend of materials for everyday carry and outdoor use. Its 2.99-inch clip-point blade is made from 14C28N stainless steel, with a stonewashed finish and 60±2HRC hardness. The steel is valued for corrosion resistance and straightforward sharpening, helping simplify routine maintenance. A ceramic ball bearing supports smooth opening, while the crossbar lock secures the blade during use. The Micarta handle provides a textured look. Measuring 6.81 inches open and 3.77 inches closed, it weighs just 2.38 ounces. Take it along for hiking, camping, fishing, hunting, or daily tasks when a lightweight folding knife suits your needs. Its 0.12-inch blade thickness and 0.96-inch width complete this versatile design.
14C28N Blade Introduction
14C28N is a high-value budget-to-midrange stainless steel that excels in corrosion resistance and ease of sharpening, making it a low-maintenance workhorse for EDC and wet environments, but it falls short of premium steels in edge retention and requires more frequent touch-ups when cutting highly abrasive materials like cardboard.
SPECIFICATIONS
Designer:TRIVISA Team
Style:Clip Point
Blade Material:14C28N Steel
Blade Finished:Stonewash
Handle Material:Micarta
Lock Style:Crossbar lock
Hardness:60±2HRC
Bearing:Ceramic ball bearing
Size:
Overall length-6.81"(173mm)
Blade length-2.99" (76mm)
Closed length-3.77"(96mm)
Blade width-0.96''(25mm)
Blade thickness-0.12''(3mm)
Net Weight:2.38oz(67.5g)
Usage:Outdoor survival,EDC,hunting,fishing, hiking and camping
Trivisa Butterfly-GM - Product Description
The Trivisa Butterfly-GM JM06-GM-14 is a clip point folding knife from TRIVISA: a 2.99-inch 14C28N blade in stonewashed, a crossbar lock and a Micarta handle at 2.38 ounces. Lighter than your phone, and it still has a real 2.99-inch blade plus an ambidextrous crossbar lock, so it is not a two-hand keychain compromise. It gets out of the way on light carry days and cuts when you need it. Inside the Trivisa knives collection it sits with the other 14C28N steel folders, and it belongs in the Crossbar Lock knives and folding knives categories if you are comparing mechanisms. If you are stocking a daily carry rotation, the specs and the honest trade-offs are below.
The 14C28N Edge
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.
Belongs in Your Pocket
- 14C28N blade steel — excellent corrosion resistance and genuinely easy sharpening for a low-maintenance daily edge
- 2.38 oz total — lighter than most phones, and it still has a real 2.99-inch blade
- Clip point profile — a fine, controllable point for detail work with a strong spine behind it
- Crossbar Lock — ambidextrous release, no fingers in the blade path, and a bar that self-adjusts as it wears
- Ceramic ball bearings in the pivot: a glassy one-hand flick that stays smooth with almost no oil
- 60±2 HRC heat treat — hard enough to hold an edge, tough enough not to chip on a dropped cut
- 3 mm blade stock — stiff enough for hard push cuts, thin enough behind the edge to slice
- TRIVISA in-house design — branded fit and finish at a price the big brands reserve for catalog work
Five Ways You Will Actually Use It
- Light carry days: shorts, gym bags and travel where every gram shows; 2.38 ounces does not pull your pocket down.
- Everyday pocket duty: at 2.38 oz and 3.77" closed it disappears in a front pocket; the crossbar release works one-handed.
- Boxes and packaging: the 2.99" Clip Point blade goes through tape and corrugated cleanly, and 14C28N touches up in seconds afterwards.
- Camp and trail: food prep, cordage, kindling and zip ties; wipe the blade dry and it goes straight back in the pocket.
- Gift for a knife person: real 14C28N steel, a Crossbar Lock and Micarta scales read as a serious tool, not a gas-station special.
Frequently Asked Questions
Is 2.38 ounces too light to be strong?
No. The weight comes out of the liners and scales, not the lock: the crossbar still engages the full blade tang. It will not pry, but it will cut all day.
Is 14C28N good steel for a folding knife?
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.
How does the crossbar lock work?
Pull the crossbar back with thumb and index finger and the blade drops free; release it and the bar snaps behind the tang. Your fingers never cross the closing path.
Will the Micarta handle hold up?
Yes. Micarta is resin-pressed fabric laminate: it absorbs shock, grips better when wet, and ages into a patina.
Steel Comparison Table
How 14C28N stacks up against steels you will meet at this price:
| Steel | Typical HRC | Edge Retention | Corrosion Resistance | Toughness | Sharpening Ease |
|---|---|---|---|---|---|
| 14C28N | 58-62 | Good | Excellent | Very good | Very easy |
| AUS-8 | 56-58 | Fair | Good | Very good | Very easy |
| 440C | 56-59 | Good | Very good | Good | Easy |
| D2 | 55-61 | Very good | Fair (semi-stainless) | Good | Moderate |
Terms Worth Knowing
14C28N
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use.
Clip Point
A spine that clips down toward the tip, giving a fine point for detail work while keeping mass at the spine.
Lightweight Carry
Sub-2.5-ounce knives built with skeletonised liners and thin scales for pocket-free carry.
PVD Coating
Physical Vapor Deposition: a vapor-bonded ceramic-metallic layer far harder and more wear-resistant than paint or plating.
Stonewash Finish
Abrasive tumbling that leaves a mottled grey surface which hides scratches and daily wear.
Micarta
Resin-pressed linen, canvas or paper laminate: shock-absorbing, grippy when wet, and it patinas with age.
G10
Fiberglass laminate prized for impact strength, chemical resistance and aggressive texture.
Carbon Fiber
Woven carbon strands in resin — high stiffness at very low weight, with a visible weave.
Titanium
Aerospace metal for handle scales: strong, light, corrosion-proof and heat-anodisable for colour.
Ceramic Ball Bearings
Ceramic races in the pivot instead of washers: smoother action, longer life, less oil.
HRC
Rockwell hardness scale C. Most quality blades run 55-62 HRC: harder holds an edge longer, softer tolerates abuse.
Clip Point Blade
The clip point profile used here, chosen for controlled cutting in everyday and outdoor work.
Who Should Buy It
- You want the lightest real knife in your rotation, not a keychain toy
- You need ambidextrous one-hand open and close in a tiny package
- You want real 14C28N steel and a Crossbar Lock at this price instead of mystery stainless
- You prefer Micarta handles that grip harder when wet
- You carry a knife every day and want ceramic-bearing smoothness without premium pricing
Who Should Skip It
- You do heavy cutting or prying — 2.38 oz is a light-duty build
- You want a blade over three inches
- You want a serrated edge — this is a plain-edge slicer
- You expect a fidget-toy action with zero break-in; give the pivot a week
Care & Maintenance
- Wipe the blade with a dry cloth after every use, especially after cutting fruit, tape or wet material.
- Wash with warm water and a drop of dish soap when needed; never run the pivot under a pressurized stream.
- Dry the knife completely before closing or storing it — trapped moisture is the main corrosion risk.
- Add a small drop of quality oil to the pivot and ceramic bearings every 4-6 weeks of regular use.
- Touch up the edge on a 1000-grit stone, then finish with a few light strokes on a ceramic rod or strop.
- Check the pivot screws periodically and re-tighten them evenly; do not over-torque.
- Store the knife dry and open or loosely closed; avoid leather sheaths for long-term storage.
- Keep Micarta, G10 and carbon fiber scales clean with soapy water and a soft brush; no solvents needed.
- Inspect the lock engagement before each heavy task — a clean click or snap means the lock is seated.
Compare it directly with other 14C28N steel knives, more Crossbar Lock knives, and the full knives catalog — or the best sellers list — before you commit.
Pago y seguridad
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Entrega y envío
Los pedidos en stock se enviarán en 48 horas, excepto fines de semana y festivos.
Los pedidos anticipados están sujetos a las fechas de envío indicadas para pedidos anticipados.
Desde el almacén de China: Entrega estimada en 15 a 21 días hábiles







