Descripción
Designed for everyday carry and outdoor use, the Trivisa Dragonfly-CG JM03-CG-14 combines a lightweight profile with practical materials. Its 2.99-inch drop-point blade is made from 14C28N stainless steel and finished in rose gold. Known for corrosion resistance and easy sharpening, this steel offers convenient maintenance, though abrasive cutting may call for more frequent touch-ups. A carbon fiber and G10 handle pairs with a crossbar lock, while ceramic ball bearings support smooth opening. At 6.73 inches overall and 2.17 ounces, it is easy to carry. The knife measures 3.74 inches closed, with a 0.12-inch blade thickness and 60±1 HRC hardness. Suitable for EDC, hiking, camping, fishing, hunting, and outdoor tasks, it balances compact size with versatile utility for daily outdoor adventures.
14C28N Blade Introduction
14C28N is a high-value budget-to-midrange stainless steel that excels in corrosion resistance and ease of sharpening, making it a low-maintenance workhorse for EDC and wet environments, but it falls short of premium steels in edge retention and requires more frequent touch-ups when cutting highly abrasive materials like cardboard.
SPECIFICATIONS
Designer:TRIVISA Team
Style:Drop Point
Blade Material:14C28N Steel
Blade Finished:Rose Gold
Handle Material: Carbon Fiber G10
Lock Style:Crossbar Lock
Hardness:60±1HRC
Bearing:Ceramic ball bearing
Size:
Overall length-6.73"(171mm)
Blade length-2.99" (76mm)
Closed length-3.74"(95mm)
Blade width-0.80''(20.3mm)
Blade thickness-0.12''(3mm)
Net Weight:2.17oz(61.5g)
Usage:Outdoor survival,EDC,hunting,fishing, hiking and camping
Trivisa Dragonfly-CG JM03-CG-14 - Product Description
The Trivisa Dragonfly-CG JM03-CG-14 is a drop point folding knife from Trivisa: a 2.99-inch 14C28N blade in rose gold, a crossbar lock and a Carbon Fiber + G10 handle at 2.17 ounces, opened by a thumb hole on ceramic bearings. A compact 2.99-inch 14C28N drop point on an ambidextrous crossbar lock, opened by a thumb hole on ceramic bearings. At 2.17 ounces it carries like a small knife but still gives a usable three-finger grip, and the sliding bar release is glove-simple. It sits in 14C28N steel company and belongs in Trivisa knives — and if you are comparing mechanisms, see the daily carry lineup below; the specs and the honest trade-offs are all here.
The 14C28N Edge
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.
Belongs in Your Pocket
- 14C28N blade steel — excellent corrosion resistance and genuinely easy sharpening for a low-maintenance daily edge
- Ambidextrous crossbar lock — pull the bar, the blade drops free; self-adjusting and safe under load
- 2.17 oz, 3.74" closed — one of the lightest real locking folders in the catalog
- Crossbar Lock — a sliding bar blocks the tang from behind — ambidextrous, self-adjusting for wear, safe to release under load
- Thumb-hole opening on ceramic ball bearings — a glassy one-hand flick that stays smooth with almost no oil
- 60 HRC heat treat — hard enough to hold a working edge, tough enough not to chip on a dropped cut
- 3 mm blade stock — stiff enough for hard push cuts, thin enough behind the edge to slice
- TRIVISA in-house design — branded fit and finish at a price the big brands reserve for catalog work
Five Ways You Will Actually Use It
- Everyday pocket duty: at 2.17 ounces it rides a front pocket unnoticed, and the crossbar release works one-handed either way.
- Everyday pocket duty: at 2.17 oz and 3.74" closed, it disappears in a front pocket; the thumb hole opens it one-handed.
- Boxes and packaging: the 2.99" drop point blade goes through tape and corrugated cleanly, and 14C28N touches up in seconds afterwards.
- Camp and trail: food prep, cordage, kindling and zip ties; wipe the blade dry and it goes straight back in the pocket.
- Gift for a knife person: real 14C28N steel, a Crossbar Lock and Carbon Fiber + G10 scales read as a serious tool, not a gas-station special.
Frequently Asked Questions
Why carry a crossbar lock instead of a liner lock?
The sliding bar is fully ambidextrous, self-adjusts as it wears, and keeps your fingers out of the blade path when closing. It is the friendliest mechanism for shared or left-handed use.
Is 14C28N good steel for a folding knife?
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.
How does the crossbar lock work?
Pull the bar back with thumb and index finger and the blade drops free on the bearings; release it and the bar snaps behind the tang. Your fingers never cross the closing path, and it works equally well left- or right-handed.
Will the Carbon Fiber + G10 handle hold up?
G10 is fiberglass laminate: it resists impact, moisture, solvents and temperature swings without swelling.
Steel Comparison Table
How 14C28N stacks up against steels you will meet at this price:
| Steel | Typical HRC | Edge Retention | Corrosion Resistance | Toughness | Sharpening Ease |
|---|---|---|---|---|---|
| 14C28N | 58-62 | Good | Excellent | Very good | Very easy |
| AUS-8 | 56-58 | Fair | Good | Very good | Very easy |
| 440C | 56-59 | Good | Very good | Good | Easy |
| D2 | 55-61 | Very good | Fair (semi-stainless) | Good | Moderate |
Terms Worth Knowing
14C28N14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use.
Crossbar Lock
A sliding bar blocks the tang from behind; ambidextrous, self-adjusting for wear and safe to release under load.
Thumb Hole
An opening cutout in the blade spine that catches the thumb for one-hand deployment — no flipper tab below the handle.
Ceramic Ball Bearings
Ceramic races in the pivot instead of washers: smoother action, longer life, less oil.
PVD Coating
Physical Vapor Deposition: a vapor-bonded ceramic-metallic layer far harder and more wear-resistant than paint or plating.
Stonewash Finish
Abrasive tumbling that leaves a mottled grey surface which hides scratches and daily wear.
Micarta
Resin-pressed linen, canvas or paper laminate: shock-absorbing, grippy when wet, and it patinas with age.
G10
Fiberglass laminate prized for impact strength, chemical resistance and aggressive texture.
Carbon Fiber
Woven carbon strands in resin — high stiffness at very low weight, with a visible weave.
Titanium
Aerospace metal for handle scales: strong, light, corrosion-proof and heat-anodizable for colour.
HRC
Rockwell hardness scale C. Most quality blades run 55-62 HRC: harder holds an edge longer, softer tolerates abuse.
Drop Point Blade
The drop point profile used here, chosen for controlled cutting in everyday and outdoor work.
Who Should Buy It
- You want a compact ambidextrous folder with a bearing-smooth action
- You carry left-handed or share knives and want an easy two-way release
- You want real 14C28N steel and a Crossbar Lock at this price instead of mystery stainless
- You value Carbon Fiber + G10 scales for grip and long-term durability
- You carry a knife every day and want branded fit and finish without premium pricing
Who Should Skip It
- You need a full four-finger grip and a 3.5-inch blade
- You want premium powder steel; 14C28N is a workhorse, not a status alloy
- You want a serrated edge — this is a plain-edge slicer
- You expect a fidget-toy action with zero break-in; give the pivot a week
Care & Maintenance
- Wipe the blade with a dry cloth after every use, especially after cutting fruit, tape or wet material.
- Wash with warm water and a drop of dish soap when needed; never run the pivot under a pressurized stream.
- Dry the knife completely before closing or storing it — trapped moisture is the main corrosion risk.
- Add a small drop of quality oil to the pivot and ceramic bearings every 4-6 weeks of regular use.
- Touch up the edge on a 1000-grit stone, then finish with a few light strokes on a ceramic rod or strop.
- Check the pivot screws periodically and re-tighten them evenly; do not over-torque.
- Store the knife dry and open or loosely closed; avoid leather sheaths for long-term storage.
- Keep Micarta, G10, aluminium and carbon fiber scales clean with soapy water and a soft brush; no solvents needed.
- Inspect the lock engagement before each heavy task — a clean click or snap means the lock is seated.
Compare it directly with other 14C28N steel knives, more Crossbar Lock knives, and the full knives catalog — or the best sellers list — before you commit.
Pago y seguridad
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Entrega y envío
Los pedidos en stock se enviarán en 48 horas, excepto fines de semana y festivos.
Los pedidos anticipados están sujetos a las fechas de envío indicadas para pedidos anticipados.
Desde el almacén de China: Entrega estimada en 15 a 21 días hábiles







