Descripción
Designed by TASKnives, the Trivisa Intruder-03O combines a tanto-point blade with a titanium and G10 handle for a practical EDC design. Its black stonewashed 14C28N stainless steel offers corrosion resistance and is easy to sharpen, making upkeep straightforward. With a hardness of 58–60 HRC, the blade measures 4.29 inches long and 0.17 inches thick. An axis lock secures the blade during use, while a washer pivot supports its tactical design. The knife measures 9.69 inches overall and 5.39 inches when closed, with a 1.41-inch blade width. Weighing 7.49 ounces, it is suited to hiking, camping, fishing, hunting, and everyday carry. Its stainless construction may require more frequent edge touch-ups when cutting abrasive materials such as cardboard.
14C28N Blade Introduction
14C28N is a high-value budget-to-midrange stainless steel that excels in corrosion resistance and ease of sharpening, making it a low-maintenance workhorse for EDC and wet environments, but it falls short of premium steels in edge retention and requires more frequent touch-ups when cutting highly abrasive materials like cardboard.
SPECIFICATIONS
Designer:TASKnives
Style:Tanto Point
Blade Material:14C28N steel
Blade Finished:Black Stonewashed
Handle Material:Titanium G10
Lock Style:Axis lock
Hardness:58-60HRC
Pivot:Washer for tactical purpose
Size:
Overall length-9.69"(246mm)
Blade length-4.29" (109mm)
Closed length-5.39"(137.13mm)
Blade width-1.41''(36mm)
Blade thickness-0.17''(4.4mm)
Net Weight:7.49oz(212.5g)
Usage:Outdoor survival,EDC,hunting,fishing, hiking and camping
Trivisa Intruder-03O - Product Description
The Trivisa Intruder-03O is a tanto point folding knife from TRIVISA: a 4.29-inch 14C28N blade in black stonewashed, an axis lock and a Titanium + G10 handle at 7.49 ounces. A 9.69-inch tactical folder with a 4.29-inch tanto blade in 4.4 mm stock — the biggest knife Trivisa ships. TASKnives designed it around a washer pivot instead of ball bearings, because a tactical pivot tolerates mud, grit and impact that would gum up bearing races. It sits in 14C28N steel company and belongs in Trivisa knives — and if you are comparing mechanisms, see the daily carry lineup below; the specs and the honest trade-offs are all here.
The 14C28N Edge
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.
Belongs in Your Work Kit
- 14C28N blade steel — excellent corrosion resistance and genuinely easy sharpening for a low-maintenance daily edge
- 4.29-inch tanto blade in 4.4 mm stock — a reinforced angular tip for puncture work and a straight edge that keeps its line
- 9.69" overall, 7.3-7.5 oz — full-size tactical reach; belt-clip territory, not skinny-jeans carry
- Axis Lock — ambidextrous release, no fingers in the blade path, and a bar that self-adjusts as it wears
- Washer pivot, tactical grade — tolerates grit, mud and impact that would slow bearing races
- 58-60 HRC heat treat — hard enough to hold a working edge, tough enough not to chip on a dropped cut
- 4.4 mm blade stock — stiff enough for hard push cuts, thin enough behind the edge to slice
- TRIVISA in-house design — branded fit and finish at a price the big brands reserve for catalog work
Five Ways You Will Actually Use It
- Duty and range work: the tanto tip punches through cordura, hose and strap, and the axis-style crossbar lock releases safely with gloves on.
- Everyday pocket duty: at 7.49 oz and 5.39" closed, it rides a full-size pocket or belt clip without apology.
- Boxes and packaging: the 4.29" tanto point blade goes through tape and corrugated cleanly, and 14C28N touches up in seconds afterwards.
- Camp and trail: food prep, cordage, kindling and zip ties; wipe the blade dry and it goes straight back in the pocket.
- Gift for a knife person: real 14C28N steel, a Axis Lock and Titanium + G10 scales read as a serious tool, not a gas-station special.
Frequently Asked Questions
Why a washer pivot instead of ball bearings?
Washers are thicker and less sensitive to grit: for a knife this size used outdoors, washer pivots keep working when mud and sand would slow a bearing race. The trade is a slightly heavier action.
Is 14C28N good steel for a folding knife?
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.
How does the axis-style crossbar lock work?
Pull the crossbar back with thumb and index finger and the blade drops free; release it and the bar snaps behind the tang. Your fingers never cross the closing path, and it works equally well left- or right-handed.
Will the Titanium + G10 handle hold up?
Titanium scales are corrosion-proof and dent-resistant; the finish may show carry marks, which is patina, not failure.
Steel Comparison Table
How 14C28N stacks up against steels you will meet at this price:
| Steel | Typical HRC | Edge Retention | Corrosion Resistance | Toughness | Sharpening Ease |
|---|---|---|---|---|---|
| 14C28N | 58-62 | Good | Excellent | Very good | Very easy |
| AUS-8 | 56-58 | Fair | Good | Very good | Very easy |
| 440C | 56-59 | Good | Very good | Good | Easy |
| D2 | 55-61 | Very good | Fair (semi-stainless) | Good | Moderate |
Terms Worth Knowing
14C28N
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use.
Tanto Point
An angular tip formed by two straight edge segments; it concentrates strength at the point for puncturing and prying-resistant work.
Washer Pivot
Phosphor-bronze or PTFE washers instead of ball bearings: more tolerant of grit and impact, slightly less glassy in the flick.
Axis-Style Crossbar Lock
A sliding bar through the handle blocks the blade tang; ambidextrous, safe to release under load, and self-adjusting for wear.
PVD Coating
Physical Vapor Deposition: a vapor-bonded ceramic-metallic layer far harder and more wear-resistant than paint or plating.
Stonewash Finish
Abrasive tumbling that leaves a mottled grey surface which hides scratches and daily wear.
Micarta
Resin-pressed linen, canvas or paper laminate: shock-absorbing, grippy when wet, and it patinas with age.
G10
Fiberglass laminate prized for impact strength, chemical resistance and aggressive texture.
Carbon Fiber
Woven carbon strands in resin — high stiffness at very low weight, with a visible weave.
Titanium
Aerospace metal for handle scales: strong, light, corrosion-proof and heat-anodizable for colour.
Resin-Stabilized Wood
Wood infused with resin under pressure: keeps a natural look while resisting moisture, cracking and swelling.
Damascus G10
G10 laminate etched or molded with a Damascus-style pattern — the look of layered steel with none of its rust care.
Ceramic Ball Bearings
Ceramic races in the pivot instead of washers: smoother action, longer life, less oil.
HRC
Rockwell hardness scale C. Most quality blades run 55-62 HRC: harder holds an edge longer, softer tolerates abuse.
Tanto Point Blade
The tanto point profile used here, chosen for controlled cutting in everyday and outdoor work.
Who Should Buy It
- You want a large tanto folder with real mass behind every cut
- You need an axis-style crossbar lock you can operate with gloves on
- You want real 14C28N steel and a Axis Lock at this price instead of mystery stainless
- You value Titanium + G10 scales for grip and long-term durability
- You carry a knife every day and want branded fit and finish without premium pricing
Who Should Skip It
- You want a lightweight pocket knife — 7.3 ounces plus a 5.39-inch closed length is serious bulk
- You cut mostly food and fruit; a tanto point is built for puncture, not slicing
- You want a serrated edge — this is a plain-edge slicer
- You expect a fidget-toy action with zero break-in; give the pivot a week
Care & Maintenance
- Wipe the blade with a dry cloth after every use, especially after cutting fruit, tape or wet material.
- Wash with warm water and a drop of dish soap when needed; never run the pivot under a pressurized stream.
- Dry the knife completely before closing or storing it — trapped moisture is the main corrosion risk.
- Add a small drop of quality oil to the pivot and ceramic bearings every 4-6 weeks of regular use.
- Touch up the edge on a 1000-grit stone, then finish with a few light strokes on a ceramic rod or strop.
- Check the pivot screws periodically and re-tighten them evenly; do not over-torque.
- Store the knife dry and open or loosely closed; avoid leather sheaths for long-term storage.
- Keep Micarta, G10 and carbon fiber scales clean with soapy water and a soft brush; no solvents needed.
- Inspect the lock engagement before each heavy task — a clean click or snap means the lock is seated.
Compare it directly with other 14C28N steel knives, more Axis Lock knives, and the full knives catalog — or the best sellers list — before you commit.
Pago y seguridad
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Entrega y envío
Los pedidos en stock se enviarán en 48 horas, excepto fines de semana y festivos.
Los pedidos anticipados están sujetos a las fechas de envío indicadas para pedidos anticipados.
Desde el almacén de China: Entrega estimada en 15 a 21 días hábiles





