QSP T-Cook QS172-B2 Black Nitro-V Blade Glow-in-the-Dark G10 Handle Fixed Blade Knife

The QSP T-Cook QS172-B2 represents a refined approach to fixed blade knife design, engineered for those who demand precision and reliability. Built around a Nitro-V blade—a premium stainless steel known for exceptional edge retention and corrosion resistance—this knife delivers professional-grade performance in a compact, practical package. The blade features a distinctive Wharncliffe profile, optimizing cutting geometry for controlled slicing and detailed work. At 5.30 inches with a robust 3.0mm thickness, it maintains structural integrity under demanding use while the 59-61 HRC hardness ensures durability without sacrificing edge-taking capability. The glow-in-the-dark G10 handle provides both functional visibility in low-light conditions and secure grip control, while the overall 9.45-inch length balances reach with maneuverability. Weighing just 102 grams, this knife minimizes fatigue during extended use. Designed by respected knife craftsman Maciej Torbé, the T-Cook combines thoughtful ergonomics with functional aesthetics, making it an excellent choice for culinary professionals, outdoor enthusiasts, and serious collectors who appreciate quality blade work.

Description

Category :  FIXED BLADE KNIFE
Mechanism :  Fixed blade
Name: T-Cook

Blade: Nitro V
Handle: Glow-in-the-Dark G10
Overall: 9.45'' (240mm)

Handle:  4.15''(105mm)
Blade: 5.30" (135mm)
Blade thickness: +/-3.0mm 

Blade shape: Wharncliffe
HRC: 59-61 ( Coated blade < Silver blade, may HRC1-2 less）
Net Weight: +/-102g (3.60oz); 
Designed by Maciej Torbé

QSP T-Cook QS172-B2 — Nitro-V 5.30 in Wharncliffe Fixed Blade

The QSP T-Cook QS172-B2 is a fixed blade designed by Maciej Torbé for the work most knives only pretend to do. The 5.30 in blade is Nitro-V at 59-61 HRC, flat ground into a wharncliffe profile with a dead-straight cutting edge - the single best shape there is for slicing protein, produce, rope and board. It runs 9.45 in overall at roughly 102 g with a Glow-in-the-Dark G10 handle, and it ships with a moulded Kydex sheath. Torbé's brief was a working kitchen knife that doubles as a QSP fixed blade; the result sits naturally with our utility knives and EDC gear.

Nitro-V Behind a 5.30 in Straight Edge

Nitro-V is the right steel for a blade this long. A 5.30 in flat-ground edge meets a cutting board thousands of times, and the failure mode you want to avoid is chipping - which is where a hard, brittle super steel goes wrong. Nitro-V at 59-61 HRC carries vanadium carbides for edge retention and nitrogen for corrosion resistance, and it stays noticeably tougher than 14C28N or 154CM under lateral load. It also comes back to sharp in a couple of minutes on a stone, which is the difference between a knife that gets maintained and one that gets put away dull. For a kitchen blade that doubles as a field knife, that is the correct trade.

Why the T-Cook Belongs in Your Pocket

• Nitro-V at 59-61 HRC: enough toughness in a 5.30 in blade to take board contact without chipping.
• Flat-ground wharncliffe edge - every millimetre cuts at the same angle, so the whole blade works.
• 5.30 in blade and 9.45 in overall: long enough to slice a full tomato or fillet a fish in one stroke.
• Glow-in-the-Dark G10 handle with a 4.15 in grip length that fits a full hand even when wet or greasy.
• Balanced at approximately 102 g, with a +/-3.0 mm spine that is stiff without being heavy.
• Moulded Kydex sheath included - it drains, it will not rot and it holds the blade by friction.
• Full tang construction: the steel runs the length of the handle, so there is no joint to loosen.
• Glow-in-the-dark handle charges in daylight and emits a green glow, so the knife is easy to find at a night camp.

Best Uses for the T-Cook

• Camp and trail cooking - slicing vegetables, protein and bread without fighting a short blade.
• Home kitchen prep as a dedicated slicing knife that will outlast any stamped blade.
• Picnics and barbecues, where a fixed blade is safer and more hygienic than a folder.
• Fishing and hunting: the straight edge makes short work of filleting and breaking down game.
• General utility duty - cutting rope, hose, cardboard and tinder at camp or in the workshop.

Frequently Asked Questions

Is a 5.30 in blade too large for a camp knife?
It is a slicer, not a chopper. The wharncliffe edge and 3.0 mm stock make it fast and precise, and 9.45 in overall still packs in a day bag.

What is the difference between the T-Cook A, B and C variants?
Handle material and blade finish. A1 and A2 run black G10 at about 102 g, B1 and B2 run glow-in-the-dark G10 at about 102 g, and C1 and C2 run glow-in-the-dark Micarta at about 95 g. Odd numbers are stonewashed, even numbers are black coated.

Does the black coating affect cutting performance?
No. The coating only changes the surface finish. QSP notes that coated blades may run 1-2 HRC points below the uncoated version, which is not detectable in normal use.

Can I sharpen Nitro-V at home?
Yes. Nitro-V grinds easily on a water stone or diamond plate and finishes cleanly on ceramic or a loaded strop.

Is the Kydex sheath left- or right-handed?
The moulded sheath is ambidextrous in use and can be mounted through its eyelets for belt, pack or teklok carry.

Nitro-V vs. Common Fixed Blade Steels

Steel	Typical HRC	Edge Retention	Corrosion Resistance	Toughness	Sharpening Ease
Nitro-V (this knife)	59-61	Good	Very Good	Better	Easy
14C28N	59-61	Good	Excellent	Good	Very Easy
154CM	58-61	Good	Good	Very Good	Moderate
CPM-S35VN	58-60	Very Good	Very Good	Better	Moderate
D2 Tool Steel	58-61	Very Good	Fair	Good	Moderate
7Cr17MoV	56-58	Fair	Good	Good	Very Easy

Nitro-V is a nitrogen-enriched stainless that trades half a step of stain resistance for noticeably better toughness than 14C28N, so a long 5.30 in slicing blade survives board contact and lateral loads that would chip a harder steel. It sharpens quickly on any water stone. HRC figures are typical mill ranges.

Glossary of Key Terms

Maciej Torbé
The Polish designer credited with the T-Cook, a fixed blade conceived around real kitchen and camp prep rather than a fantasy silhouette.

Wharncliffe Blade
A dead-straight 5.30 in cutting edge rising to a sturdy point. Every millimetre of the edge works at the same angle, which is why it excels at slicing protein, produce and cord.

Nitro-V
A nitrogen-enriched martensitic stainless at 59-61 HRC. Vanadium carbides hold the edge, nitrogen resists corrosion, and it stays unusually tough for its hardness.

Fixed Blade
A full-tang knife with no pivot or lock: fewer parts to fail, more strength at the joint and instant deployment from the sheath.

Kydex Sheath
A thermoformed thermoplastic sheath moulded to the exact blade profile. It retains by friction, drains water and will not rot like leather.

Full Tang
Blade steel that runs the full length of the handle, so the knife is one continuous piece of steel rather than a blade pinned to a separate frame.

Glow-in-the-Dark G10
A G10 laminate dosed with strontium-aluminate phosphor, charging in daylight and emitting a green glow in darkness so the knife is easy to find at a night camp.

Glow-in-the-Dark Micarta
Resin-and-cloth Micarta carrying the same phosphor charge. It grips better when wet and glows green in the dark after a few minutes under light.

59-61 HRC
The Rockwell C hardness band this blade is heat treated to: hard enough to hold a kitchen edge through long prep sessions, still practical to sharpen at home.

Who Should Buy the T-Cook

• You want one fixed blade that works in the kitchen and at camp.
• You prefer a straight wharncliffe edge for slicing over a curved belly.
• You want Nitro-V toughness rather than a brittle super steel.
• You need a glow-in-the-dark handle for low-light camp use.
• You want a full-tang blade with a sheath included rather than a folder with a pivot to service.

Who Should Skip It

• You need a chopper or a batoning knife - this is a slicer with a 3.0 mm spine.
• You want a folding knife that disappears in a pocket; a 9.45 in fixed blade does not.
• You will not dry the blade after kitchen use: Nitro-V is stainless but food acid still spots it.
• You want a heavy, thick-spined bushcraft knife for splitting wood.
• You insist on a super steel with maximum wear resistance rather than toughness.

Care & Maintenance

• Wipe the blade dry after every use; Nitro-V resists rust well but food acid and sweat still spot bare steel.
• Oil the blade and pivot every four to eight weeks - fixed blades live in sheaths where moisture lingers.
• Sharpen on a coarse-to-fine water stone or diamond plate; Nitro-V grinds easily and takes a scary-sharp edge fast.
• Finish on a loaded strop - light pressure only, because heavy passes round the apex and dull the edge you just set.
• Rinse and dry immediately after kitchen use, especially after citrus, onion or raw meat.
• Wash black-coated blades separately so the coating is never scrubbed against other steel.
• Clean the Kydex sheath out with warm soapy water and let it dry fully - grit inside a sheath scratches the blade.
• Never use the blade as a cleaver on bone or frozen food; 3.0 mm stock is a slicer, not a hatchet.
• Keep glow-in-the-dark G10 or Micarta charged by leaving it under a lamp; the phosphor fades in storage.