Copper Changes Everything
Most knives are aluminum, titanium, G10, or micarta. Copper is rare because it is heavy and because it does not stay the same color. The Dragonfly-CU weighs 4.44 ounces, which is nearly double the PEI version of the same knife, and almost all of that extra weight is in the scales.
That is the trade you are making. In exchange, you get a handle that develops a patina unique to how you carry it, and a warmth that no other material matches.
Specs and Build
The blade is 14C28N with a black PVD finish, 2.99 inches long, 0.12 inches thick, 60±1 HRC. Open length is 6.73 inches, closed is 3.74 inches. The lock is a crossbar, and the pivot runs on ceramic bearings.
Everything except the scales is standard Dragonfly, which is a good thing. The crossbar is well tuned, the blade is a useful drop point, and the action is smooth.
Living With Copper
Copper oxidizes. Within a week, the shiny orange surface starts to darken where your hand touches it. Within a month, you get a mottled brown and green pattern that looks like an old penny. Some people buy copper knives specifically for this. Others are horrified.
If you are in the second group, you can polish it back with a cloth and lemon juice, but it will patina again. There is no way to keep copper looking new unless you seal it, and sealing defeats the point.
Weight and Balance
At 4.44 ounces, this is the heaviest Dragonfly by a wide margin. The Koala-sized frame with copper scales feels dense in the hand, almost like a small paperweight. For a knife with a 2.99 inch blade, that is a lot of mass.
Whether that is good depends on how you carry. In a jeans pocket, it is fine. In lightweight shorts, it pulls. In a jacket pocket, it is unnoticeable.
Corrosion Between the Scales
Copper and steel in contact with moisture can cause galvanic corrosion over time. In practice, this is a minor issue on a well-made knife with a liner between the materials, but you should still dry the knife after use and check under the scales once a year. A little oil on the liners helps.
Should You Buy It
Buy it if you want a knife that looks different from everything else in your collection and you enjoy watching materials age. Skip it if you want a low-maintenance tool or you need something light.
The rest of the Dragonfly lineup offers the same blade in PEI, G10, and carbon fiber if copper is too much. And if you want to compare the whole brand, the Trivisa catalog has options from 1.77 ounces up to full-size working knives.
Pairing It With the Rest of Your Kit
A copper knife is a statement piece, so it pairs best with gear that does not compete for attention. A plain titanium pen, a black flashlight, and a leather wallet keep the focus on the patina. If you are building an EDC carry around it, lean minimal.
The Dragonfly-CU is also a good desk knife. It sits flat, looks good in a tray, and the weight keeps it from sliding around. That is a niche use, but it is one where copper makes sense.






























