Kansept Kursor G015C5 Blackwash Titanium+Green Anodized Titanium EDC Tool

The Kursor G015C5 represents a masterclass in minimalist EDC design, engineered by renowned designer Justin Koch. This titanium multi-tool weighs just 37.5g, delivering exceptional strength without compromising portability. Its defining feature—interchangeable scales in G10, Micarta, and Fatcarbon—enables personalization to match your aesthetic preferences. Beyond its modular appeal, the Kursor functions as a practical pry bar for everyday problem-solving. The integrated lanyard hole and deep pocket clip ensure secure carry, while its compact profile makes it an indispensable addition to any serious EDC collection. Precision meets versatility in this refined pocket companion.

SPECIFICATIONS

Dimensions	88.8*19*6.6mm
Material	Blackwash Titanium; Green Anodized Titanium Inlay
Finish	Blackwash Titanium
Color	Black ; Green
Model Name	Kursor
Model Number	G015C5
Designer	Koch Tools

 

Kansept Kursor G015C5 - Blackwash Titanium with Green Anodized Inlays

The Kansept Kursor G015C5 is a Justin Koch (Koch Tools) pry tool: a 37.5 g titanium wedge-ground chisel profile riding a blackwashed titanium frame with green anodized inlay scales. At 88.8 x 19 x 6.6 mm it is slimmer than most folders, yet it carries the Koch signature nobody else ships at this price - interchangeable scale sets in G10, Micarta and Fatcarbon. It slots into the Koch Tools designed range inside the Kansept EDC line, next to the titanium pry bar selection and the Kansept carabiner tools. The Kansept store, the EDC accessories shelf and the whole EDCMALL catalogue cover the rest.

A Pry Tool You Can Re-Skin Instead of Replace

Most pry tools are one slab of metal and nothing to customise. Koch's Kursor treats the scales as a wear surface you can change: the inlay sets screw on, so a scratched or bored-out pair can be swapped for fresh G10, warm Micarta or patterned Fatcarbon without retiring the tool. Under them sits a wedge-ground chisel tip that opens paint lids, battery doors, staples and tins - the jobs that chip knife tips - while the blackwashed frame shrugs off the marks that job creates. The deep-carry clip seats it low, the lanyard hole takes a keyring, and at 37.5 g you will forget which pocket it is in until you need it. This colourway pairs the blackwash frame with green anodized inlays; the anodizing is an oxide grown into the metal, so the green wears honestly rather than flaking.

Why the Kansept Kursor G015C5 Belongs in Your Pocket

• Wedge-ground chisel tip for paint lids, battery doors, staples and tins
• Interchangeable inlay scales - swap G10, Micarta or Fatcarbon sets in minutes
• Blackwash titanium frame with green anodized titanium inlays on this colourway
• 37.5 g - lighter than most folding knives of similar length
• 88.8 x 19 x 6.6 mm: slimmer than a marker, sized for a fifth pocket or slip
• Deep pocket clip plus lanyard hole for clip-free carry
• Koch Tools x Kansept collaboration, machined to knife-line tolerances
• A collector-grade alternative to stamped steel pocket pry bars

Best Uses for the Kansept Kursor G015C5

• Office and IT work: battery doors, staple pins and stuck tabs without a knife tip
• Everyday carry next to a folder - the tool that keeps your blade edges intact
• Collector display: scale-swapping to match the rest of a Koch or Kansept set
• Travel and site work where a flat, blade-free tool passes easily
• A premium gift for the Koch Tools fan who already owns the knives

Frequently Asked Questions

Which scales fit the Kursor?
Kansept and Koch offer the Kursor platform with G10, Micarta and Fatcarbon inlay sets. The scales screw on and off, so sets can be swapped between colourways.

Is the tip replaceable if I damage it?
The chisel is part of the one-piece titanium body - it is not replaceable. That is why the design caps it at light-duty levering; abuse it against hardened steel and the edge will deform.

How does it compare to the CrowBar?
The CrowBar is a wider, flatter plate with wrench slots and a bottle opener at $23.89. The Kursor is slimmer, lighter, clip-carry optimised, and modular - it is the premium, designer option of the two.

Will the green anodizing fade?
The colour is an oxide layer grown into the titanium. It polishes honestly at high points with years of carry, but it cannot peel or flake like paint.

Does it rust?
The titanium frame and inlays cannot rust. Only the steel pocket clip needs an occasional drop of oil, especially after salt-air exposure.

Glossary of Key Terms

Koch Tools
Justin Koch's Alabama workshop - the Kursor is a Kansept x Koch Tools collaboration, machined to the same standard as the Koch-designed Korvid and Mini Korvid knives.

Justin Koch
The designer behind Koch Tools Co. and the Kursor's scale-swap pry-bar platform.

Interchangeable Scales
The Kursor's handle slabs are held by screws and can be swapped for G10, Micarta or Fatcarbon sets, so one body covers several looks.

Fatcarbon
A thick carbon-fiber laminate made in bold colours and patterns; lighter than metal and far more patterned than plain G10.

Pry Bar Tip
The wedge-ground chisel end. Sized for paint-lid tabs, battery doors, staples and light levering - not demolition work.

Blackwash Titanium
A dark tumble-and-etch treatment on the titanium frame that reads near-black at a glance and hides carry marks.

Green Anodized Titanium
Titanium coloured by growing a controlled oxide layer with current rather than painting it, so the green cannot chip - only wear honestly.

Deep Pocket Clip
A clip that seats the tool low in the pocket so only the steel clip shows above the hem.

Who Should Buy the Kansept Kursor G015C5

• Koch Tools collectors completing the Justin Koch-designed lineup
• EDC carriers who want a clip-carry pry tool that still looks premium
• Buyers who value modular gear they can re-skin instead of replace
• Gift shoppers looking for a designer titanium tool under eighty dollars

Who Should Skip It

• Anyone wanting heavy demolition levering - the tip is light-duty by design
• Buyers on a budget; the Kansept CrowBar covers similar ground for far less
• People who never swap scales - the modularity is most of the price premium

Care & Maintenance

• Wipe the blackwash frame with a dry cloth after carry; fingerprints mute the etch faster than wear does.
• The green anodized inlays clean with a damp cloth only - solvents and abrasive polish dull the oxide colour.
• If you swap scale sets, re-torque the scale screws evenly and check them again after a week of carry.
• A drop of light oil on the clip screws twice a year keeps rust from starting under the clip.
• The chisel tip is for paint lids, battery doors and staples - do not hammer with it or punch hard materials.
• Blow lint out from under the deep-carry clip so the tool still seats low and tight in the pocket.
• After beach or salt-air carry, rinse in fresh water and dry; the clip steel is the only corrosion-prone part.
• Store spare G10, Micarta or Fatcarbon scale sets dry and separated so their surfaces do not mar each other.
• Blackwash finishes polish honestly at the high points with carry - patina, not a defect.