QSP Moray QS171-B Vanax Blade Raffir Calceon Ocean Blue Handle Copper washers Lock Folding Knife

The QSP Moray QS171-B represents a refined approach to everyday carry design, combining premium materials with thoughtful engineering. Built around a Vanax steel blade with belt satin finish, this knife delivers exceptional edge retention and corrosion resistance—ideal for demanding environments. The flat grind geometry ensures efficient cutting performance across varied tasks. The Raffir Calceon ocean blue handle provides both aesthetic appeal and functional ergonomics, while the spear point blade profile offers versatility for precision work and general cutting duties. Copper washers facilitate smooth, reliable blade deployment without the maintenance demands of traditional ball bearings. The robust lock mechanism ensures secure blade positioning during use. At 6.25 inches open and 3.58 inches closed, the Moray balances accessibility with practical cutting capacity. The 2.67-inch blade and 88-gram weight distribution create a well-proportioned tool that won't fatigue during extended carry. Hardened to 60-62 HRC, the Vanax steel maintains its edge while remaining responsive to field maintenance. A sophisticated choice for discerning knife enthusiasts seeking reliability without compromise.

Description

Category :  POCKET KNIFE
Mechanism :  Copper washers
Name: Moray

Blade: Vanax, belt satin 
Grind: Flat 
Handle: Raffir Calceon Ocean Blue

Lock: Spear point
Mechanism: Copper washers
Overall: 6.25" (159mm )

Closed: 3.58" ( 91mm)
Blade: 2.67" ( 68mm)
Blade thickness: +/- 2.7mm

HRC: 60-62
Net weight:+/-88g(3.10oz)

QSP Moray QS171-B: Vanax Spear Point on Raffir Calceon Ocean Blue

The QSP Moray series sits at the top of the QSP Knife range: a compact folding knife with a Vanax spear-point blade, copper-washer action and Raffir Calceon scales. It belongs with the dress side of QSP folding knives and the wider EDCMALL EDC catalogue.

Why the QSP Moray QS171-B Belongs in Your Pocket

• Vanax powder-metallurgy stainless, 2.67 in / 68 mm spear point at 60-62 HRC
• Belt satin finish on a flat grind - low glare, easy touch-ups, clean slicing geometry
• Raffir Calceon Ocean Blue scales: every set shows its own natural figure
• Copper washers give a silky, damped action without bearing maintenance
• 6.25 in / 159 mm open, 3.58 in / 91 mm closed - a true pocket-sized dress knife
• Only 88 g on the scale, balanced right over the pivot
• Leather storage pouch included as shown in the gallery
• Premium natural-material handle that no two buyers will own identically

Best Uses for the QSP Moray QS171-B

• Boardroom and office carry where a tactical knife would look out of place
• Fine detail work: mail, threads, tape and package slits with a needle-centred point
• Wedding, anniversary and retirement gifts that photograph beautifully
• Collector display cases - Vanax + natural handle material is a grail combination
• Restaurant dinners and travel where a compact, non-threatening folder fits the moment

Frequently Asked Questions

Is Vanax worth the price over 14C28N?
Vanax holds an edge roughly twice as long as 14C28N at the same hardness while staying equally stainless. You are also paying for powder-metallurgy consistency and premium handle material.

How do I care for mother-of-pearl?
Wipe it with a soft damp cloth and keep it dry. Pearl is moisture-sensitive: never soak it, and keep it away from solvents and ultrasonic cleaners.

What are copper washers versus ball bearings?
Phosphor-bronze washers give a damped, silky action that tolerates dust and pocket lint better than caged bearings, with nothing to grit up or corrode quickly.

Does the Moray come with a sheath or pouch?
Yes - every Moray ships with the leather storage pouch shown in the gallery images.

What hardness is the blade?
QSP heat treats the Vanax blade to 60-62 HRC, hard enough for long edge life while remaining practical to sharpen at home on a fine water stone.

Vanax vs. Common Premium Knife Steels

Steel	Typical HRC	Edge Retention	Corrosion Resistance	Toughness	Sharpening Ease
Vanax (this knife)	60-62	Excellent	Excellent	Good	Moderate
CPM-S90V	59-61	Excellent	Very Good	Fair	Difficult
CPM-S35VN	58-60	Very Good	Very Good	Better	Moderate
M390	60-62	Excellent	Excellent	Good	Difficult
154CM	58-61	Good	Good	Very Good	Moderate
14C28N	59-61	Good	Excellent	Good	Very Easy

Vanax is a nitrogen-rich powder-metallurgy stainless from Uddeholm, run at 60-62 HRC here. Nitrogen replaces part of the carbon load, so vanadium nitrides hold a wearing edge while the matrix stays far tougher and more stain-resistant than equivalent high-carbon super steels. HRC figures are typical mill ranges.

Glossary of Key Terms

QSP Knife
A production house known for finishing quality well above its price band - tight tolerances, honest heat treats and premium natural materials.

Vanax Steel
Uddeholm's nitrogen-alloyed powder-metallurgy stainless, hardened to 60-62 HRC. Vanadium nitrides give excellent edge retention while the matrix stays unusually tough and stain-free.

Mother of Pearl
Natural nacre from mollusc shell, sliced and set as handle scales. Iridescent, cool to the touch, and no two knives share the same figure.

Raffir Calceon
A mineral-resin composite block with translucent, water-like depth - stabilised so it polishes to a gem finish and shrugs off daily handling.

Blue Crystal Titanium
Titanium whose surface oxide has been heat-coloured to a deep crystal blue - no dye, no plating, just controlled oxide thickness.

Copper Washers
Phosphor-bronze washers at the pivot that give a silky, damped blade action without the maintenance sensitivity of caged ball bearings.

Spear Point
A symmetric blade that rises to a needle-centred point. Strong for piercing, with enough belly for clean slicing.

Belt Satin Finish
A linear finish drawn along the blade with belt sanding - kills glare and hides fine scratches better than a mirror polish.

Who Should Buy the QSP Moray QS171-B

• Collectors who want Vanax steel - rare in production knives at this price
• Gift buyers: pearl or Calceon handles make this an easy 'wow' unboxing
• Office and dress-carry professionals who still want real cutting performance
• QSP completists adding the flagship Moray to a Penguin or Chameleon rotation

Who Should Skip It

• Hard-use workers - a $270 pearl-handled dress knife is not a jobsite tool
• Anyone who soaks gear; natural pearl and Raffir prefer dry carry
• Users who want a lockbar-deep security folder; this is a refined gentleman's action
• Budget buyers; our 14C28N folders deliver 90% of the daily performance for a third

Care & Maintenance

• Wipe the blade dry after use; Vanax is strongly stainless but fingerprints still etch over weeks.
• Oil the copper-washer pivot with one drop of quality knife oil every month or two.
• Do not soak mother-of-pearl handles in water; pearl is moisture-sensitive and prefers a dry wipe.
• Clean pearl with a soft damp cloth only - solvents and ultrasonic cleaners dull the nacre.
• Blow dust out of the blade channel before closing so grit never drags across the satin finish.
• Sharpen on a fine water stone; Vanax at 60-62 HRC responds well but cuts slowly - use light passes.
• Do not pry or twist the tip; thin 2.7 mm spear-point stock is built for slicing precision.
• Condition the leather pouch occasionally with a pH-neutral balm and store it dry.
• Keep the knife out of hot cars; sustained heat can stress pearl and resin handle materials.