Description
The Trivisa Cen-06BC combines a hand-satin-finished Bohler M390 powder steel blade with a distinctive multicolor, sea-wave-finished titanium handle. Designed by Steve Cheng, this front-flipper folding knife features a ceramic ball-bearing pivot and a frame lock for smooth opening and secure use. The blade measures 3.58 inches, while the knife opens to 8.26 inches overall and folds to 4.72 inches for convenient carry. At 3.52 ounces, it offers a lightweight option for everyday carry and outdoor activities such as hiking, camping, fishing, or hunting. M390 steel is valued for wear and corrosion resistance and strong edge retention; its hardness can make sharpening more challenging, and heavy lateral stress may increase the risk of chipping. A practical design meets standout craftsmanship in this compact folding knife.
M390 Blade Introduction
M390 is an advanced powder-metallurgical stainless steel utilizing high chromium and vanadium content to deliver exceptional wear resistance and industry-leading corrosion resilience. It excels at retaining a razor-sharp edge under prolonged use; however, this extreme hardness renders the blade notably difficult to sharpen or reprofile without diamond abrasives. Additionally, its fine microstructure, while offering superior edge stability, sacrifices some structural toughness and may be more prone to chipping under heavy lateral stress.
Specification
Designer:Steve Cheng
Style:Front Flipper
Blade Material:Bohler M390 powder steel
Blade Finished: Hand satin finished
Handle Material:Titanium(Multicolor craft finished sea wave)
Lock Style:Frame lock
Hardness:60-62HRC
Bearing:Ceramic ball bearing
Size:
Overall length-8.26"(210mm)
Blade length-3.58" (91mm)
Closed length-4.72"(119mm)
Blade width-0.43''(11mm)
Blade thickness-0.11''(3mm)
Net Weight:3.52oz(100g)
Usage:Outdoor survival,EDC,hunting,fishing, hiking and camping
Trivisa Cen-06BC - Product Description
The Trivisa Cen-06BC is a front flipper folding knife from TRIVISA: a 3.58-inch M390 blade in hand satin, a frame lock and a Sea Wave Titanium handle at 3.52 ounces. A front flipper with a hand-satin M390 blade and a titanium handle finished in multicolor sea-wave craft pattern, designed by Steve Cheng. The frame lock is cut from the handle slab itself, so there is no liner to flex — the strongest lock geometry Trivisa ships, on the most exotic handle finish in the catalog. It sits in M390 steel company and belongs in Trivisa knives — and if you are comparing mechanisms, see the daily carry lineup below; the specs and the honest trade-offs are all here.
The M390 Edge
M390 is Böhler’s powder-metallurgy super steel: extreme wear resistance, first-class corrosion resistance, and edge retention that dwarfs conventional steels. The trade-offs are price and sharpening difficulty — expect diamond stones.
Belongs in Your Rotation
- M390 blade steel — powder-metallurgy super steel with class-leading edge retention and corrosion resistance, at diamond-stone sharpening difficulty
- Frame lock in the handle slab — no liner to flex or foul; the most rigid lock geometry for hard cuts
- Craft-finished titanium handle — sea-wave or handmade pattern over 3.52 oz of full-titanium build
- Frame Lock — the lock bar is machined into the handle slab itself — the strongest lock geometry, with nothing to flex or foul
- Ceramic ball bearings in the pivot: a glassy one-hand flick that stays smooth with almost no oil
- 60-62 HRC heat treat — hard enough to hold a working edge, tough enough not to chip on a dropped cut
- 3 mm blade stock — stiff enough for hard push cuts, thin enough behind the edge to slice
- TRIVISA in-house design — branded fit and finish at a price the big brands reserve for catalog work
Five Ways You Will Actually Use It
- Collector rotation: hand-finished titanium and M390 put this on the display shelf, but the front flipper still snaps open fast enough for daily duty.
- Everyday pocket duty: at 3.52 oz and 4.72" closed, it disappears in a front pocket; the release works one-handed.
- Boxes and packaging: the 3.58" front flipper blade goes through tape and corrugated cleanly, and M390 touches up in seconds afterwards.
- Camp and trail: food prep, cordage, kindling and zip ties; wipe the blade dry and it goes straight back in the pocket.
- Gift for a knife person: real M390 steel, a Frame Lock and Sea Wave Titanium scales read as a serious tool, not a gas-station special.
Frequently Asked Questions
Is the Cen worth it over a $60 Trivisa folder?
If you want M390, full titanium and a frame lock in one knife, yes — nothing cheaper in the range combines all three. If you mainly cut cardboard, a 14C28N Corvus or Hornet does the same work for a third of the price.
Is M390 good steel for a folding knife?
M390 is Böhler’s powder-metallurgy super steel: extreme wear resistance, first-class corrosion resistance, and edge retention that dwarfs conventional steels. The trade-offs are price and sharpening difficulty — expect diamond stones.
How does the frame lock work?
The handle slab itself is the lock: part of the titanium frame springs behind the blade tang and blocks it from closing. Push the bar aside with your thumb to close — there is no separate liner, so nothing can flex or foul.
Will the Sea Wave Titanium handle hold up?
Titanium scales are corrosion-proof and dent-resistant; the finish may show carry marks, which is patina, not failure.
Steel Comparison Table
How M390 stacks up against steels you will meet at this price:
| Steel | Typical HRC | Edge Retention | Corrosion Resistance | Toughness | Sharpening Ease |
|---|---|---|---|---|---|
| M390 | 60-62 | Excellent | Excellent | Fair | Hard (diamond stones) |
| CPM 20CV | 59-61 | Excellent | Excellent | Fair | Hard (diamond stones) |
| Elmax | 59-61 | Excellent | Excellent | Good | Moderate |
| CPM S35VN | 58-61 | Very good | Excellent | Good | Moderate |
Terms Worth Knowing
M390
M390 is Böhler’s powder-metallurgy super steel: extreme wear resistance, first-class corrosion resistance, and edge retention that dwarfs conventional steels.
Frame Lock
A lock bar machined from the handle slab itself that wedges behind the blade tang. Rigid, thin in the pocket, and the geometry most makers reserve for premium builds.
Front Flipper
A flipper tab on the spine side that the index finger presses to launch the blade; when closed it doubles as a finger guard.
Sea-Wave Finish
A multicolor anodizing and etching treatment that flows across the titanium like layered water; every handle is unique.
PVD Coating
Physical Vapor Deposition: a vapor-bonded ceramic-metallic layer far harder and more wear-resistant than paint or plating.
Stonewash Finish
Abrasive tumbling that leaves a mottled grey surface which hides scratches and daily wear.
Micarta
Resin-pressed linen, canvas or paper laminate: shock-absorbing, grippy when wet, and it patinas with age.
G10
Fiberglass laminate prized for impact strength, chemical resistance and aggressive texture.
Carbon Fiber
Woven carbon strands in resin — high stiffness at very low weight, with a visible weave.
Titanium
Aerospace metal for handle scales: strong, light, corrosion-proof and heat-anodizable for colour.
Resin-Stabilized Wood
Wood infused with resin under pressure: keeps a natural look while resisting moisture, cracking and swelling.
Damascus G10
G10 laminate etched or molded with a Damascus-style pattern — the look of layered steel with none of its rust care.
Ceramic Ball Bearings
Ceramic races in the pivot instead of washers: smoother action, longer life, less oil.
HRC
Rockwell hardness scale C. Most quality blades run 55-62 HRC: harder holds an edge longer, softer tolerates abuse.
Front Flipper Blade
The front flipper profile used here, chosen for controlled cutting in everyday and outdoor work.
Who Should Buy It
- You want an M390 blade with a titanium handle and a frame lock in one build
- You collect craft-finished titanium scales — no two patterns match
- You want real M390 steel and a Frame Lock at this price instead of mystery stainless
- You value Sea Wave Titanium scales for grip and long-term durability
- You carry a knife every day and want branded fit and finish without premium pricing
Who Should Skip It
- You need a beater knife; hand-satin M390 and craft titanium deserve careful carry
- You want an easy-to-sharpen steel — M390 demands diamond stones
- You want a serrated edge — this is a plain-edge slicer
- You expect a fidget-toy action with zero break-in; give the pivot a week
Care & Maintenance
- Wipe the blade with a soft cloth after use; hand-satin finishes show smudges and salt easily.
- Wash with warm soapy water and dry fully before closing; avoid abrasive pads on the finished blade.
- Oil the pivot and ceramic bearings every 4-6 weeks; M390 blades rarely need blade oil but it does no harm.
- Sharpen with diamond stones (300-600 grit to repair, 1000+ to refine); conventional stones load up quickly.
- Strop after sharpening to restore the crisp M390 edge; micro-beveling reduces the chance of edge chipping.
- Do not pry or twist laterally with the blade — high-hardness powder steels chip under lateral stress.
- Check pivot screws every month and tighten evenly; titanium handles hold torque well.
- Wipe patterned titanium scales with a damp cloth; avoid harsh chemicals that alter the finish.
- Store dry, ideally in the original box or a fabric pouch rather than a sealed plastic bag.
Compare it directly with other M390 steel knives, more Frame Lock knives, and the full knives catalog — or the best sellers list — before you commit.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Delivery and Shipping
In-stock orders will be shipped in 48 hours except weekend and holidays.
Pre-orders pls subject to the indicated Pre-order shipping dates.
From China warehouse: Estimated delivery in 15–21 business days







