Trivisa Intruder-03O 14C28N Blade Titanium and G10 Handle Axis Lock Folding Knife

New
Trivisa KnivesSKU: Intruder-03O

Price:
Sale price$82.66 USD

Description

Designed by TASKnives, the Trivisa Intruder-03O combines a tanto-point blade with a titanium and G10 handle for a practical EDC design. Its black stonewashed 14C28N stainless steel offers corrosion resistance and is easy to sharpen, making upkeep straightforward. With a hardness of 58–60 HRC, the blade measures 4.29 inches long and 0.17 inches thick. An axis lock secures the blade during use, while a washer pivot supports its tactical design. The knife measures 9.69 inches overall and 5.39 inches when closed, with a 1.41-inch blade width. Weighing 7.49 ounces, it is suited to hiking, camping, fishing, hunting, and everyday carry. Its stainless construction may require more frequent edge touch-ups when cutting abrasive materials such as cardboard.

14C28N Blade Introduction

14C28N is a high-value budget-to-midrange stainless steel that excels in corrosion resistance and ease of sharpening, making it a low-maintenance workhorse for EDC and wet environments, but it falls short of premium steels in edge retention and requires more frequent touch-ups when cutting highly abrasive materials like cardboard.

SPECIFICATIONS

Designer:TASKnives
Style:Tanto Point
Blade Material:14C28N steel
Blade Finished:Black Stonewashed
Handle Material:Titanium G10
Lock Style:Axis lock
Hardness:58-60HRC
Pivot:Washer for tactical purpose

Size:
Overall length-9.69"(246mm)
Blade length-4.29" (109mm)
Closed length-5.39"(137.13mm)
Blade width-1.41''(36mm)
Blade thickness-0.17''(4.4mm)
Net Weight:7.49oz(212.5g)

Usage:Outdoor survival,EDC,hunting,fishing, hiking and camping

Trivisa Intruder-03O - Product Description

The Trivisa Intruder-03O is a tanto point folding knife from TRIVISA: a 4.29-inch 14C28N blade in black stonewashed, an axis lock and a Titanium + G10 handle at 7.49 ounces. A 9.69-inch tactical folder with a 4.29-inch tanto blade in 4.4 mm stock — the biggest knife Trivisa ships. TASKnives designed it around a washer pivot instead of ball bearings, because a tactical pivot tolerates mud, grit and impact that would gum up bearing races. It sits in 14C28N steel company and belongs in Trivisa knives — and if you are comparing mechanisms, see the daily carry lineup below; the specs and the honest trade-offs are all here.

The 14C28N Edge

14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.

Belongs in Your Work Kit

  • 14C28N blade steel — excellent corrosion resistance and genuinely easy sharpening for a low-maintenance daily edge
  • 4.29-inch tanto blade in 4.4 mm stock — a reinforced angular tip for puncture work and a straight edge that keeps its line
  • 9.69" overall, 7.3-7.5 oz — full-size tactical reach; belt-clip territory, not skinny-jeans carry
  • Axis Lock — ambidextrous release, no fingers in the blade path, and a bar that self-adjusts as it wears
  • Washer pivot, tactical grade — tolerates grit, mud and impact that would slow bearing races
  • 58-60 HRC heat treat — hard enough to hold a working edge, tough enough not to chip on a dropped cut
  • 4.4 mm blade stock — stiff enough for hard push cuts, thin enough behind the edge to slice
  • TRIVISA in-house design — branded fit and finish at a price the big brands reserve for catalog work

Five Ways You Will Actually Use It

  • Duty and range work: the tanto tip punches through cordura, hose and strap, and the axis-style crossbar lock releases safely with gloves on.
  • Everyday pocket duty: at 7.49 oz and 5.39" closed, it rides a full-size pocket or belt clip without apology.
  • Boxes and packaging: the 4.29" tanto point blade goes through tape and corrugated cleanly, and 14C28N touches up in seconds afterwards.
  • Camp and trail: food prep, cordage, kindling and zip ties; wipe the blade dry and it goes straight back in the pocket.
  • Gift for a knife person: real 14C28N steel, a Axis Lock and Titanium + G10 scales read as a serious tool, not a gas-station special.

Frequently Asked Questions

Why a washer pivot instead of ball bearings?

Washers are thicker and less sensitive to grit: for a knife this size used outdoors, washer pivots keep working when mud and sand would slow a bearing race. The trade is a slightly heavier action.

Is 14C28N good steel for a folding knife?

14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.

How does the axis-style crossbar lock work?

Pull the crossbar back with thumb and index finger and the blade drops free; release it and the bar snaps behind the tang. Your fingers never cross the closing path, and it works equally well left- or right-handed.

Will the Titanium + G10 handle hold up?

Titanium scales are corrosion-proof and dent-resistant; the finish may show carry marks, which is patina, not failure.

Steel Comparison Table

How 14C28N stacks up against steels you will meet at this price:

Steel Typical HRC Edge Retention Corrosion Resistance Toughness Sharpening Ease
14C28N 58-62 Good Excellent Very good Very easy
AUS-8 56-58 Fair Good Very good Very easy
440C 56-59 Good Very good Good Easy
D2 55-61 Very good Fair (semi-stainless) Good Moderate

Terms Worth Knowing

14C28N
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use.

Tanto Point
An angular tip formed by two straight edge segments; it concentrates strength at the point for puncturing and prying-resistant work.

Washer Pivot
Phosphor-bronze or PTFE washers instead of ball bearings: more tolerant of grit and impact, slightly less glassy in the flick.

Axis-Style Crossbar Lock
A sliding bar through the handle blocks the blade tang; ambidextrous, safe to release under load, and self-adjusting for wear.

PVD Coating
Physical Vapor Deposition: a vapor-bonded ceramic-metallic layer far harder and more wear-resistant than paint or plating.

Stonewash Finish
Abrasive tumbling that leaves a mottled grey surface which hides scratches and daily wear.

Micarta
Resin-pressed linen, canvas or paper laminate: shock-absorbing, grippy when wet, and it patinas with age.

G10
Fiberglass laminate prized for impact strength, chemical resistance and aggressive texture.

Carbon Fiber
Woven carbon strands in resin — high stiffness at very low weight, with a visible weave.

Titanium
Aerospace metal for handle scales: strong, light, corrosion-proof and heat-anodizable for colour.

Resin-Stabilized Wood
Wood infused with resin under pressure: keeps a natural look while resisting moisture, cracking and swelling.

Damascus G10
G10 laminate etched or molded with a Damascus-style pattern — the look of layered steel with none of its rust care.

Ceramic Ball Bearings
Ceramic races in the pivot instead of washers: smoother action, longer life, less oil.

HRC
Rockwell hardness scale C. Most quality blades run 55-62 HRC: harder holds an edge longer, softer tolerates abuse.

Tanto Point Blade
The tanto point profile used here, chosen for controlled cutting in everyday and outdoor work.

Who Should Buy It

  • You want a large tanto folder with real mass behind every cut
  • You need an axis-style crossbar lock you can operate with gloves on
  • You want real 14C28N steel and a Axis Lock at this price instead of mystery stainless
  • You value Titanium + G10 scales for grip and long-term durability
  • You carry a knife every day and want branded fit and finish without premium pricing

Who Should Skip It

  • You want a lightweight pocket knife — 7.3 ounces plus a 5.39-inch closed length is serious bulk
  • You cut mostly food and fruit; a tanto point is built for puncture, not slicing
  • You want a serrated edge — this is a plain-edge slicer
  • You expect a fidget-toy action with zero break-in; give the pivot a week

Care & Maintenance

  1. Wipe the blade with a dry cloth after every use, especially after cutting fruit, tape or wet material.
  2. Wash with warm water and a drop of dish soap when needed; never run the pivot under a pressurized stream.
  3. Dry the knife completely before closing or storing it — trapped moisture is the main corrosion risk.
  4. Add a small drop of quality oil to the pivot and ceramic bearings every 4-6 weeks of regular use.
  5. Touch up the edge on a 1000-grit stone, then finish with a few light strokes on a ceramic rod or strop.
  6. Check the pivot screws periodically and re-tighten them evenly; do not over-torque.
  7. Store the knife dry and open or loosely closed; avoid leather sheaths for long-term storage.
  8. Keep Micarta, G10 and carbon fiber scales clean with soapy water and a soft brush; no solvents needed.
  9. Inspect the lock engagement before each heavy task — a clean click or snap means the lock is seated.

Compare it directly with other 14C28N steel knives, more Axis Lock knives, and the full knives catalog — or the best sellers list — before you commit.

Payment & Security

Apple Pay Google Pay Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Delivery and Shipping

In-stock orders will be shipped in 48 hours except weekend and holidays.

Pre-orders pls subject to the indicated Pre-order shipping dates.

From China warehouse: Estimated delivery in 15–21 business days

You may also like

Recently viewed