Description
The Trivisa Monoceros-03D TY25-DG-14 folding knife pairs a practical cleaver-point profile with a 14C28N stainless-steel blade for everyday use. Finished in stonewashed and satin styles, the blade is easy to maintain and sharpen. A G10 handle and liner lock complete the design, while ceramic ball bearings support smooth opening. The blade measures 3.38 inches, and the knife is 8.26 inches long overall. At 4.27 ounces, it offers a portable option for daily carry and outdoor activities. Its hardness is rated at 58–60 HRC. The knife also features a 5.19-inch closed length, a 0.98-inch blade width, and a 0.13-inch blade thickness. Take it along for camping, hiking, fishing, or hunting, or keep it on hand for routine cutting tasks.
14C28N Blade Introduction
14C28N is a high-value budget-to-midrange stainless steel that excels in corrosion resistance and ease of sharpening, making it a low-maintenance workhorse for EDC and wet environments, but it falls short of premium steels in edge retention and requires more frequent touch-ups when cutting highly abrasive materials like cardboard.
SPECIFICATIONS
Designer:TRIVISA team
Style:Cleaver Point
Blade Material:14C28N steel
Blade Finished:Stonewashed and satin
Handle Material:G10
Lock Style:Liner lock
Hardness:58-60HRC
Bearing:Ceramic ball bearing
Size:
Overall length-8.26"(210mm)
Blade length-3.38" (86mm)
Closed length-5.19"(132mm)
Blade width-0.98''(25mm)
Blade thickness-0.13''(3.5mm)
Net Weight:4.27oz(121.1g)
Usage:Outdoor survival,EDC,hunting,fishing, hiking and camping
Trivisa Monoceros-03D TY25-DG-14 - Product Description
The Trivisa Monoceros-03D TY25-DG-14 is a cleaver point folding knife from TRIVISA: a 3.38-inch 14C28N blade in stonewash and satin, a liner lock and a G10 handle at 4.27 ounces. A cleaver-point profile on a folding platform: the flat, broad 3.38-inch blade works like a mini cleaver for board-style cuts, tape and strap, while the satin-and-stonewash finish keeps it presentable. A 5.19-inch closed length means this is a pocket knife for people with real pockets. It sits in 14C28N steel company and belongs in Trivisa knives — and if you are comparing mechanisms, see the daily carry lineup below; the specs and the honest trade-offs are all here.
The 14C28N Edge
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.
Belongs in Your Pocket
- 14C28N blade steel — excellent corrosion resistance and genuinely easy sharpening for a low-maintenance daily edge
- Cleaver point — a flat, straight edge that shears through tape, strap and food with a board-style cut
- 8.26" open / 5.19" closed — long reach and a broad 0.98-inch blade for real work
- Liner Lock — the simplest lock to understand, the easiest to flush clean, and one-hand closable
- Ceramic ball bearings in the pivot: a glassy one-hand flick that stays smooth with almost no oil
- 58-60 HRC heat treat — hard enough to hold a working edge, tough enough not to chip on a dropped cut
- 3.5 mm blade stock — stiff enough for hard push cuts, thin enough behind the edge to slice
- TRIVISA in-house design — branded fit and finish at a price the big brands reserve for catalog work
Five Ways You Will Actually Use It
- Breakdown days: flat cleaver-style shearing cuts through cardboard, strapping and shrink wrap faster than a narrow drop point.
- Everyday pocket duty: at 4.27 oz and 5.19" closed, it disappears in a front pocket; the release works one-handed.
- Boxes and packaging: the 3.38" cleaver point blade goes through tape and corrugated cleanly, and 14C28N touches up in seconds afterwards.
- Camp and trail: food prep, cordage, kindling and zip ties; wipe the blade dry and it goes straight back in the pocket.
- Gift for a knife person: real 14C28N steel, a Liner Lock and G10 scales read as a serious tool, not a gas-station special.
Frequently Asked Questions
What is a cleaver point actually for?
The straight, broad edge excels at shearing cuts — cardboard, strap, kitchen-style slicing. It has little point for piercing, so it is a work shape, not a tactical one.
Is 14C28N good steel for a folding knife?
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use. It gives up some edge retention to premium powder steels, so plan on quick touch-ups after heavy cardboard or abrasive cutting.
How does the liner lock work?
The liner springs behind the blade tang as the blade opens and blocks it from closing. Push the liner aside with your thumb to close — one hand, one motion, edge away from your fingers.
Will the G10 handle hold up?
G10 is fiberglass laminate: it resists impact, moisture, solvents and temperature swings without swelling.
Steel Comparison Table
How 14C28N stacks up against steels you will meet at this price:
| Steel | Typical HRC | Edge Retention | Corrosion Resistance | Toughness | Sharpening Ease |
|---|---|---|---|---|---|
| 14C28N | 58-62 | Good | Excellent | Very good | Very easy |
| AUS-8 | 56-58 | Fair | Good | Very good | Very easy |
| 440C | 56-59 | Good | Very good | Good | Easy |
| D2 | 55-61 | Very good | Fair (semi-stainless) | Good | Moderate |
Terms Worth Knowing
14C28N
14C28N is Sandvik’s budget-to-midrange stainless workhorse: outstanding corrosion resistance, a fine edge that is genuinely easy to sharpen, and enough toughness for hard daily use.
Cleaver Point
A broad, mostly straight blade with a blunt angled tip, modeled on a kitchen cleaver: maximum shearing edge, minimal piercing.
Shearing Cut
A straight draw cut across material, like a paper cutter — the cleaver edge’s specialty.
Liner Lock
A sprung liner wedges behind the blade tang; simple, proven and easy to flush clean.
PVD Coating
Physical Vapor Deposition: a vapor-bonded ceramic-metallic layer far harder and more wear-resistant than paint or plating.
Stonewash Finish
Abrasive tumbling that leaves a mottled grey surface which hides scratches and daily wear.
Micarta
Resin-pressed linen, canvas or paper laminate: shock-absorbing, grippy when wet, and it patinas with age.
G10
Fiberglass laminate prized for impact strength, chemical resistance and aggressive texture.
Carbon Fiber
Woven carbon strands in resin — high stiffness at very low weight, with a visible weave.
Titanium
Aerospace metal for handle scales: strong, light, corrosion-proof and heat-anodizable for colour.
Resin-Stabilized Wood
Wood infused with resin under pressure: keeps a natural look while resisting moisture, cracking and swelling.
Damascus G10
G10 laminate etched or molded with a Damascus-style pattern — the look of layered steel with none of its rust care.
Ceramic Ball Bearings
Ceramic races in the pivot instead of washers: smoother action, longer life, less oil.
HRC
Rockwell hardness scale C. Most quality blades run 55-62 HRC: harder holds an edge longer, softer tolerates abuse.
Cleaver Point Blade
The cleaver point profile used here, chosen for controlled cutting in everyday and outdoor work.
Who Should Buy It
- You want a cleaver-style folder without the $150 price tag
- You cut packaging and strap daily and prefer a straight shearing edge
- You want real 14C28N steel and a Liner Lock at this price instead of mystery stainless
- You value G10 scales for grip and long-term durability
- You carry a knife every day and want branded fit and finish without premium pricing
Who Should Skip It
- You want a piercing tip for puncture work — the cleaver point has almost none
- You carry slim jeans; a 5.19-inch closed length is a big folder
- You want a serrated edge — this is a plain-edge slicer
- You expect a fidget-toy action with zero break-in; give the pivot a week
Care & Maintenance
- Wipe the blade with a dry cloth after every use, especially after cutting fruit, tape or wet material.
- Wash with warm water and a drop of dish soap when needed; never run the pivot under a pressurized stream.
- Dry the knife completely before closing or storing it — trapped moisture is the main corrosion risk.
- Add a small drop of quality oil to the pivot and ceramic bearings every 4-6 weeks of regular use.
- Touch up the edge on a 1000-grit stone, then finish with a few light strokes on a ceramic rod or strop.
- Check the pivot screws periodically and re-tighten them evenly; do not over-torque.
- Store the knife dry and open or loosely closed; avoid leather sheaths for long-term storage.
- Keep Micarta, G10 and carbon fiber scales clean with soapy water and a soft brush; no solvents needed.
- Inspect the lock engagement before each heavy task — a clean click or snap means the lock is seated.
Compare it directly with other 14C28N steel knives, more Liner Lock knives, and the full knives catalog — or the best sellers list — before you commit.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Delivery and Shipping
In-stock orders will be shipped in 48 hours except weekend and holidays.
Pre-orders pls subject to the indicated Pre-order shipping dates.
From China warehouse: Estimated delivery in 15–21 business days







