Overview & First Impressions
Trivisa built the Cen platform twice, and the two versions deserve a side-by-side before you pick. The Cen-06BC wears a multicolor sea-wave anodize over a hand-satin M390 blade; the Cen-H pairs a black titanium-coated stonewashed blade with a handmade titanium handle. Underneath the finishes, the mechanicals are identical: 3.58-inch M390 at 60-62 HRC, front flipper, ceramic bearings, frame lock, 8.26 inches open, 3.52 ounces. The decision is purely aesthetic - which says more about you in the pocket.
Build Quality & Materials
Both blades are the same Bohler M390, and both benefit from the same maintenance rhythm: weekly stropping, occasional diamond-stone sharpening, and honest expectations about what 62 HRC steel wants. The finishes diverge in behavior. The Cen-H's black titanium coating reads uniform and stealthy, and it wears to a bright steel line along the bevel as you sharpen - a progress marker some owners grow fond of. The 06BC's hand satin is bare metal, so it patinas and scuffs honestly instead of hiding anything.
Design & Ergonomics
The handmade distinction on the Cen-H is not marketing fluff: the chamfers and finish transitions are worked individually, and the anodizing on our sample was consistent edge to edge. Both handles share the same 4.72-inch closed geometry, so grip is identical - the frame lock engages at the same point, the flipper tab sits at the same depth, and the pocket clip carries the same way.
Performance & Real-World Use
Carried both versions during the same week to isolate the finish differences. The 06BC collected comments; the Cen-H collected none, which is precisely the point of a black coating. In wet weather both performed identically - M390 does not rust under normal carry, and neither finish interfered with grip. Flipper action was tuned equally well on both samples, falling open with the same satisfying snap.
Carry & Ownership Notes
At EdcMall both versions are stocked side by side, which makes the comparison easy to run yourself. Buyers who rotate between Trivisa knives often pick the Cen-H for daily abuse and the 06BC for occasions - the same logic that separates a daily-watch bracelet from a dress piece. For titanium knife fans deciding between coatings, remember that black titanium coatings deepen scratch contrast on the flats while bare satin spreads wear evenly. Ownership split, practically speaking: the Cen-H suits daily carry because its black coating tolerates neglect, and few titanium knives forgive lapses in care as gracefully as coated ones. The 06BC rewards attention with a finish that photographs better every month of patina development. Both share spare-part compatibility - clips, hardware, and pivot components cross over - so maintaining a pair costs little more than maintaining one, a detail pair-buyers consistently appreciate.
Who Is This For?
Anyone choosing between stealth and showcase, gift buyers deciding how loud the reaction should be, and collectors who eventually buy both anyway - this platform makes that path inevitable.
Final Verdict
One platform, two personalities. Buy the finish you would actually carry; the steel underneath never lets you down either way.































